chitahome 
Nowadays, there are so many products of 3 way crossover home audio in the market and you are wondering to choose a best one.You have searched for 3 way crossover home audio in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 3 way crossover home audio which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Technical Pro XO3 3 Way Crossover with Subwoofer Output, 20Hz-25kHz 1dB Frequency Response, Black
Crossover: Sub: 50-250Hz; Lo/Mid 70-1000Hz; Mid/Hi 480-7000Hz Frequency Response: 20Hz-25kHz 1dB Low Cut Filters: 30Hz / -3dB, 12dB/Octave Inputs: 1/4" (6.35mm) Outputs: Balanced XLR, 1/4" (6.35mm) Total Harmonic Distortion: <0.05% Signal to noise ratio: >95dB Impedance: Input – 100 Kohms, Output – 220 ohms Dimensions: 19"w x 1.75"h x 5.75"d (483 x 45 x 146mm) Weight: 5.5 lbs (2.5 kg) 110-220V Switchable
2 PACK 3 way Crossover CRX-303 300 Watts Passive Crossover Car Audio Tweeter
Amazon.com
- CRYSTAL CLEAR SOUND WITH A DEEPER BASS for a true cinematic experience. Powered by Dynamic Balance, Distance Toggle & Polk's patented Power Port technology, the 265 RT In wall speaker comes with (2) 6.5 inches Mid/Woofer & a 1 inches Dome Tweeter
- BUILD A HIGH PERFORMANCE HOME THEATER SYSTEM THAT DELIVERS! Designed to offset reflective surfaces with no sound distortions, use this 3 way speaker as LEFT/RIGHT SPEAKERS OR REAR SURROUNDS in a 3.1, 5.1, 6.1 or 7.1 channel system
2- Audiopipe CRX-303 300W Crossovers Two Brand new Audiopipe CRX-303 300 Watt Crossovers. These are a very high quality passive crossover network. This gives you the ability to have a woofer a mid speaker and a tweeter running off of one speaker wire input, it also powers each of those speakers at the proper frequency for optimum sound quality! This makes setting up or improving your car audio system way easier and quicker! This is a must have for car audio installations! You will recieve 2 CRX-303 Crossover’s Specifications:Two Audiopipe 4 ohm CrossoversWoofer Frequency: 20Hz-5.6KHzMidrange Frequency: 700Hz-4KHzTweeter Frequency: 5KHz-20KHz12DB Per Octave Slope (4 OHMS)Enclosed ABS CabinetGold Plated Screw Terminals150 Watts RMS / 300 Watts PeakHigh Grade Polymer CapacitorsFerrite and Air Cooled Spools
Polk Audio 265-RT 3-way In-Wall Speaker – The Vanishing Series | Easily Fits in Ceiling/Wall | High-Performance Audio – Use in Front, Rear or as Surrounds | With Power Port & Paintable Grille
Amazon.com
- Splits stereo signals into 3 stereo bands (LOW / MID / HIGH) and a 4th mono band for the subwoofer. For use with 3-way speakers in combination with a subwoofer, the CX-23SW connects directly to the 3 speaker amplifiers and subwoofer via XLR connectors
- Phase inversion switches on the MID and HIGH bands allows driver phase adjustment, and low-cut subsonic filters provide low frequency driver protection
Nady CX-23SW 3-Way Stereo, Plus Subwoofer Crossover – Fits in a 19" Single Rack Space (1U) – For multi-amplifier setup
Amazon.com
- 3-way, 3-speaker bass-reflex system, 5-1/4" Foamed-Mica Cellular Reinforced Woofer, 1" Polyester Main Tweeter
- 3/4" Sony Super Tweeter for immersive sound staging, Sound Reproduction to 50kHz (for High Resolution Audio), 6 ohm Speaker Impedance
- Optimized Crossover componentry for a clear audio path, 100 W Maximum Input Power
- Front Speaker Rated Impedance: 6 ohms
Sony SSCS5 3-Way 3-Driver Bookshelf Speaker System (Pair)
Yamaha NSIC800WH 140-Watts 2-Way RMS Speaker — White (2 Speakers)
Amazon.com
- Size: 7*5*2.5cm (LWH)
- Inductance adopts anaerobic copper winding , and pure copper wire.
- The crossover soprano + available bass binary frequency sound box, can also be used in 2.1 the high small satellite box and automotive loudspeakers.
- Implementing overall debugging, no welding, using very convenient, and listening to the sound effects can implement debugging control according to their own interests.
AOSHIKE 400W Adjustable Multi Speaker Treble/Bass 2 Unit Audio Frequency Divider 2 Way Crossover Filters Updated Version
Specifications:
1)Size: 7*5*2.5cm (LWH)
2)Suitable for Speaker Power: 400W or lower
3)Suitable for Speaker Impedance: 4 to 16 ohm
With 4 jumpers onboard to optimize your audio effect: Jumper A, B for bass; Jumper C, D for treble.
Details about jumpers:
Jumper A, B are used to control audio effect of bass range. A for lower limit while B for upper limit of the bass audio range. For some speakers, when Bass is turned up too much, the speaker will show distortion. When that happens: we remove the jumper cap of jumper A to limit super low Bass to bring distortion lower. When we remove the cap of jumper B, Bass is increased while cap of Jumper B is on, Bass is decreased. Jumper C and D are used to control Treble range. When cap of both jumper C and D are on, the sound of treble is loudest. When only cap C is on, the treble sound is lower. When only cap D is on, further lower. When both caps of C and D are removed, there is no treble sound. (Generally speaking, with the four jumpers, you’d sooner or later find your best sound effect. Anyway, all effects still depend on your actual test.)
How to use the splitter board:
First connect as per our diagram above (Treble, Low, Input), connect to speaker, seal air gap, we can begin to hear music while optimize. Normally we use jumper A and let B idle.
For jumper C and D: we need to hear the actual effect of treble.
A general formula is: A+D=better Bass; A+C=clear Treble and Bass;
A+CD=clear Treble and Bass (the overall effect inclined towards Treble); AB+CD=more mediant frequency.
When Bass effect is unnecessarily high, we can remove cap A. Please optimize until you think the sound is best, and then fix the board with your speaker unit.
Packaging
1pcs*Crossover Filters 400W
uxcell 2 x 180W 3-Way Crossover Filters Frequency Divider
Amazon.com
- Crossover frequency: 800Hz
- 4500HZ
- Highly transparent sound, very open clear, precise and neat.
- High speed transients, detailed sound show is like watching an actor as bright as day on the stage.
- To listen to symphonies and passionate style of music it gives people a very enjoyable experience.
AOSHIKE 2pcs 3 Way Frequency Divider Crossover KASUN AS-33C 3Way 3 Unit HiFi Speaker Frequency Dividers Crossover Filters
Amazon.com
- AUDIO CROSSOVER: Lanzar Vibe 3 way electronic crossover network features hi-pass and low-pass crossover. Hi-pass crossover has 32Hz - 800 kHz frequency response for front and rear channels. Low-pass crossover has 50Hz - 160 kHz for subwoofer channel
- POWER LED INDICATOR: This indicator will light up when switching power supply is activated, and the unit is operational. Also, pack with remote subwoofer level control and parallel input switch, mixed in/out switch
2pcs 3 Way Frequency Divider Crossover KASUN AS-33C 3Way 3 Unit HiFi Speaker Frequency Dividers Crossover Filters
Crossover frequency: 800Hz; 4500Hz.
Maximum power: 160W.
Applicable Speaker Impedance: 6-8ohm; Medium 5-8ohm; tweeter 5-8ohm.
Filter characteristics: bass tweeter 12db / oct; midrange 24db / oct.
Size: 118mm * 91mm * 37mm.
Upgraded 3-Way Electronic Audio Crossover – Network Hi-Pass and Low-Pass Channel 12dB Octave Slope Power LED Indicator w/Remote Subwoofer Control and Parallel Input Switch – Lanzar Vibe VIBEX6
3-Way Electronic Crossover Hi-Pass Crossover: 32Hz-800Hz For Front & Rear Channels X10 Frequency Multiplier For Front Channel Low-Pass Crossover: 50Hz-160Hz For Subwoofer Channel 18dB Per Octave Crossover Slope Variable Bass Frequency: 40Hz-120kHz Boost Level: 0-12dB Parallel Input Switch, Mixed In/Out Switch Remote Subwoofer Level Control Power On LED Indicator Dimensions: 7.5H x 7W x 1.4D
3 Way Frequency Divider 200W HiFi Audio Speaker Treble Midrange Bass 3 Units Crossover Filters – 2pcs
Parameters:
Max withstand power: 200W
Applicable speaker impedance: 4-8 Ω
Filtering characteristics: 12 dB / otc
Frequency points: 450Hz / 4700Hz
Size (L * W * H): 119 * 78 * 30mm
Net weight: 0.4kg
Wiring Instructions:
W: Connect bass output
M: Connect the midrange output
T: Connect the treble output
IN: Connect the amplifier input
(Please note the distinction between positive and negative)
Package Includes:
2 x 3-way Frequency Divider
CT Sounds Universal Car Audio Passive 3 Way Crossover Set for Component Speakers
CT Sounds 3-Way Crossovers
