Product Description

The PCA3 mini stereo power amplifier from Pyle provides up to 75W of power on each channel at 4 Ohms. Connect your inputs using the RCA jacks, and output an amplified audio signal over standard speaker push jacks. It’s compatible with any audio or computer device–you can even hook up an iPod using a 3.5mm to RCA jack converter. A master volume control on the front lets you adjust the gain, and treble, bass, and volume controls on the front let you tweak your sound to exactly how you want it. The PCA3 runs on 110V or 220V with a voltage selector switch.

From the Manufacturer

Front View
Click here for a larger image

Connection Diagram
Click here for a larger image

Stereo Power Amplifier
Click here for a larger image

Back View
Click here for a larger image

The Ultimate Stereo Power Amplifier

This amplifier gives you the power and versatility you need to create a professional sound system. Its wide frequency response makes it suitable for amplifying any type of audio including music or vocals. It can be used in meeting halls, restaurants, schools, stores, and at home –the perfect solution for paging systems anywhere. Get the power you need with 2 x 75 Watt to handle all your audio needs.

110/220 Voltage Selector

This amplifier has selectable input voltage from 110 V/60 Hz (the standard in USA and Canada) to 220 V/50 Hz (for European operation). Please make sure the switch is in the proper position before operating.

Compatibility

Compatible with CD players, walkmans, and computerized devices, including MP3s, via 3.5 millimeter to RCA converter.

RCA L/R Line Input

Lets you connect the desired line input source.

Take Control

Use the control center panel located on the face of the unit to make adjustments to microphone volume, master volume, balance, bass, and treble.

Push Type Speaker Terminals

Lets you easily connect speaker wires directly to the amplifier.

Replaceable Power Fuse

The amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse and replace it if necessary. (Replacement fuse to use: 1.5-amp, 250-volt, fast-acting 5 x 20 millimeter fuse –not included)

Additional Features

• Harmonic Distortion: 0.3%
• 2 x 75 Watt RMS at 4 Ohm
• Blue LED Output Level Display
• Frequency Response: 20 Hz-40 kHz
• Power Fuse: 1.5 A, 250V Fast-Acting (5 x 20 millimeter)
• Power Requirement: 120 V AC 50 Hz/230 V AC 50 Hz
• Tone Controls: Bass and Treble: +/-10dB (100 Hz/10 kHz)
• Dimensions: 8.27 x 2.72 x 5.39 inch (190 x 70 x 137 millimeter)

Product Description

The Pyle PTAU45 Home Amplifier is perfect for powering any stereo system. Complete with USB, CD and AUX inputs, and 2 x 120 watts of power. This simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs. Using sophisticated circuitry and premium components for uncompromising musicality, this product is famous for delivering powerful and accurate sound. This small but powerful amp delivers clear and crisp audio for the listener. Durable and affordable, this amp is made to last.

Features:

From the Manufacturer

Front View
Click here for a larger image

Connection Diagram
Click here for a larger image

Back View
Click here for a larger image

Stereo Power Amplifier
Click here for a larger image

The Ultimate Stereo Power Amplifier

This amplifier gives you the power and versatility you need to create a professional sound system. Its wide frequency response makes it suitable for amplifying any type of audio including music or vocals. It can be used in meeting halls, restaurants, schools, stores, and at home –the perfect solution for paging systems anywhere. Get the power you need with 2 x 120 Watt to handle all your audio needs.

Switchable Mixing (Karaoke) Mode

When set to ‘mixing’ the signals from AUX1, AUX2, CD, & MIC will exist at the same time and works great for creating a karaoke event. Your music will play from your selected audio source and you will be able to sing through a connected microphone. (Microphone not included)

Switchable MIC Pager Mode

When set to ‘pager’ the signal from AUX1, AUX2, & CD will be attenuated by -12dB and the signal from MIC will override to page (Auto Talkover) and makes for an exceptional paging system.

USB 2.0 Input Interface with LED Indicator

You’ll be in control with playback options when you insert a USB flash drive –or similar USB device. Play your favorite audio files from your computer’s media library when you connect it directly into the amplifier.

.14-Inch AUX-In Jack

The .14-inch jack, located conveniently in the front, allows you to connect the input of many devices including iPods, MP3 players, smartphones, CD players etc.

Push Type Speaker Terminals

Lets you easily connect speaker wires directly to the amplifier. The speaker impedance can be ranged from four to eight Ohms for the general stereo output. The total speaker impedance must be at least four Ohms per channel at stereo mode.

110/220 Voltage Selector

This amplifier has selectable input voltage from 110 V/60 Hz (the standard in USA and Canada) to 220 V/50 Hz (for European operation). Please make sure the switch is in the proper position before operating.

.25-Inch Phone Jack

Accepts headphones with .25-inch plugs.

.25-Inch Microphone Input Jack

Accepts microphones with .25-inch plugs.

REC RCA Output

Lets you connect the amplifier to a tape deck for recording.

Take Control

Use the control center panel located on the face of the unit to make adjustments to microphone volume, master volume, balance, bass, and treble

Replaceable Power Fuse

The amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse, and replace it if necessary. (Replacement fuse to use: 1.5-amp, 250-volt, fast-acting .2 x .8 inches fuse -not included)

Additional Features

• Harmonic Distortion: 0.3%
• 2 x 120 Watt RMS at four Ohms
• Blue LED Output Level Display
• Frequency Response: 20 Hz-20 kHz
• Power Fuse: 1.5 A, 250 V Fast-Acting (.2 x .8 inches)
• Power Requirement: 120 V AC 60 Hz/230 V AC 50 Hz
• Tone Controls: Bass & Treble: +/-10 dB (100 Hz/10 kHz)
• Dimensions: 8.27 x 2.72 x 5.39 inches

No matter what your audio mixing needs, this Pyle PMXU43BT mixing desk provides the performance and features that can take your talent to the next level. With professional sound quality, our legendary mic preamps, EQs and 16-Bit DSP Multi-FX processor makes us the envy of sound engineers and producers all around the world! DJ & Studio Console Mixer System Multi 4-Channel Audio Source Mixing Built-in Bluetooth Wireless Receiver FX (Analog Effects) & 16 Bit DSP processor Direct-to-Computer Connect & Sound Record Ability LCD Digital Display & Front Panel Control Center Rotary Adjustment Knobs & LED Indicator Lights MP3 Digital Audio File Compatibility USB Interface: MP3 Flash Drive Reader/Computer Connection Connect & Stream Audio from External Devices (2) 1/4’’ (L/R) MAIN Outputs (2) XLR/14’’ Combo Audio LINE/Microphone Inputs 1/4’’ Mono + Stereo Inputs 1/4’’ Send + Return Inputs 1/4’’ Headphone Jack Stereo Level Fader/Slider Output Signal Level Indication BUS Audio Control, Sound Routing PAD Channel Source Input Switch Independent Channel Input Audio Configuration Gain, High, Mid, Low, FX/Send, Level, Base + Tone Adjustment +48V Phantom Power Control Bluetooth Studio Mixer Power Adapter Cable, 4-Pin Hassle-Free Audio Streaming Ability Works with All of Today’s Latest Devices (Smartphones, Tablets, Laptops, Computers, etc.) Bluetooth Network Name: ‘KT-08UP’ Bluetooth Version: 4.0 Wireless Range: 15’+ ft. Input Mixer Channels: 4-Ch. (+ FX/Headphones) Mic Input: Sensitivity/Impedance: 1.5mV/750 Ohm Input Frequency Response: 20Hz-20kHz, +/-3dB Input Distortion: 0.03%, 1kHz/150mV Input Channel GAIN Adjustment: +20/+64 (-6/+38) HIGH Gain: +/-15 dB, 12kHz Frequency Shelving MID Gain: +/-15 dB, 2.5kHz Frequency Shelving LOW Gain: +/-15 dB, 80kHz Frequency Shelving HIGH/MID/LOW Adjustment: -15/+15dB Stereo Output Level Meter: 5-Segment (+6, +3, 0, -3, -10dB) PAD Input Channel Adjustment: 26dB Peak CLIP Level: < 3db="" phantom="" power="" voltage:="" +48v="" power="" supply:="" 100/240v="" (+/-15v="" dc="" power="" adapter)="" digital="" audio="" file="" compatibility="" file-types:="" mp3,="" wav="">

PSW10 fills in the bottom end of your home theater system. Relieve your main speakers from performing bass duty and let them work on the mids and highs. PSW10 is a great addition to any subwooferless system and will bring your movie watching experience to the next level. All woofers feature a floor coupled downward firing port. This configuration brings you maximum bass impact while keeping the front of the cabinet as low profile as possible. All Polk products are made using the best materials and the most advanced manufacturing techniques. They pass the industry’s most exhaustive quality tests, including drop testing, extreme signal response and UV & salt exposure testing. Polk loudspeakers are built to perform for a lifetime. The voltage of the item is Standard US Voltage / 120 volts.

Power Amplifier – 4000 Watts – Model Number: MBG-4000, Power Handling 2 x 500 Watts @ 8 Ohms, 2 x 1000 Watts @ 4 Ohms, Momentary Peak Output 4000 Watts @ 4 Ohm Bridge. , Technical Specs Input level: 0 dB, Input Resistance: 20K ohm, Rising Speed: 45 v/us (BTL-MONO 90v/us), Distortion for adjustment: 95 dB, Frequency Response: 20Hz-20K Hz, General Harmonic Wave Distortion: 20Hz-20K Hz . , Front of Amplifier Channel A and B volume controls, Clip maximum level indicator, Signal indicator, Power indicator, Power red when started. Rear of Amplifier Channel A and B signal input (XLR & 1/4″ jack connectors), Channel A and B power output (Speakon & binding post connectors), Stereo/Bridge Mono switch, Lift/Ground switch, Fuse: 10A, AC input: 110V, 50-60 Hz, Dual cooling fan. Dimensions: 2 Space / Fits Standard 19″ rack cases, Weight: 18.5 lbs., Brand New, One Year Warranty. Our MBG amplifiers are a step up from our LE series.  We have still tried to keep your budget in mind without compromising quality.  These MBG amps pack a lot of juice in a cost effective amplifier.  These amps are easily capable of pushing two 18″ subwoofer cabinets or a pair of dual 15″ speakers.

Product Description

Pyle Model : PFA200

Hi-Fi Audio Amplifier, 60 Watt

60 Watt Class-T Hi-Fi Audio Amplifier with AC Adapter Included

Features:

From the Manufacturer

60-Watt Hi-Fi Audio Amplifier
view larger.

view larger.

12V AC/DC Adapter Included
view larger.

Control Face with Illuminated Volume Knob
view larger.

Compact Power
view larger.

Add Versatility to Your Entertainment System
view larger.

Compact Amplified Power

Part of the Pyle Home line, this 60-watt multipurpose digital Hi-Fi audio amplifier packs a punch. The PFA200 can be used in your car or home and, despite its compact size, will give your entertainment system a big boost. The state-of-the-art design uses surface mount components and advanced engineering for proven performance, reduced signal interference, and long operational life.

Customize Your Audio Experience

The PFA200 features a 3.5 mm input jack, enabling direct iPod/MP3 player connections, as well as microphone and audio input jacks. This unit will ensure low distortion and acoustically accurate reproduction of audio.

Tone/direct switching allows for customized listening via separate bass and treble adjustments – or the original sound can be passed through without enhancement.

Built-In Safety Features

The PFA200 houses built-in safety features including short cut, overload, and overheat protection to keep both it and other connected devices functioning properly and safely. The built-in loudspeaker protection circuit triggers when the amplifier is turned on to protect your speakers from high volume bursts. Overload protection shuts down the amplifier if input voltage exceeds 14.4 volts.

Pyle Home Line

The Pyle Home line includes a wealth of products and accessories designed to enrich your media experiences at home and on the go. Pyle offers projectors, TVs, mounts, stands, and more, all fully-equipped with state-of-the-art HD technology and compatible with your favorite Blu-ray players, for crisp, hi-res picture quality. The Pyle Home line is also compatible with next-generation video game consoles like Xbox 360, PlayStation 3, and Wii, and carries the cables and adapters you need for a fully operational setup.

Explore More Stereo Amplifiers from Pyle:

	PFA100	PFA200 Currently Viewing	PFA300	PFA400U
Total Watt Power	30	60	90	100
Home/Car Use	&#10004	&#10004	&#10004	&#10004
iPod/MP3 Jack	&#10004	&#10004	&#10004	RCA Inputs
Microphone Jack	&#10004	&#10004	&#10004	&#10004
USB & SD Memory Slots				&#10004

Pyle Model : PTA24BT

Bluetooth Home Audio Source Amplifier

Compact Bluetooth Home Audio Amplifier, 2-Ch. Audio Source Stereo Receiver System with FM Radio, MP3/USB/SD/AUX Playback (250 Watt)

Features:

Bluetooth Connectivity:

What’s in the Box:

Technical Specs:

This 250-watt amp brings music to the living room with crystal clear clarity. With plenty of inputs, you won’t find this amplifier lacking. It features a built-in FM radio with digital LCD display. It’s equipped with RCA inputs on the back and two ¼” mic jacks on the front, so you can turn this amp into a karaoke machine – even add an echo effect. Easily adjust the volume, balance, treble, bass on the master output for total control of your sound. Remote is already included. Runs on 110 and 220 V AC.