Product Description

The Lexicon Alpha Desktop Recording Studio continues the tradition of excellence established by its popular siblings, the Lambda and Omega desktop recording studios. Alpha Studio is a bus-powered 2x2x2 USB I/O Mixer packaged as a complete recording solution with Cubase LE and the Lexicon Pantheon VST Reverb plug-in. The Alpha Studio features one XLR microphone input, two TRS line inputs, and two TRS & RCA line outs. Alpha’s front panel features an ultra high-z 1/4-inch instrument input for direct to computer recording and a 1/8-inch high powered headphone output for use with professional or consumer headphones. Record anywhere you can carry your laptop! Studio quality hardware and powerful software that turns your PC or Mac into a 24-bit recording studio. FOUR INPUTS: RECORD UP TO TWO TRACKS AT ONCE! Stereo line inputs for keyboards, drum machines or analog output of a CD/MP3 player. RF-filtered TRS active-balanced inputs accept either balanced or unbalanced signals. Low-noise mic preamp with balanced XLR inputs. High-impedance front panel input for electric guitar or bass. PROFESSIONAL MIXER FEATURES Separate mic and line level input controls with individual peak indicators. Monitor mix control for balancing an audio source between live input and playback mix level while recording. Can be switched to stereo or mono. High-powered headphone amp offers ultra-clear fidelity while delivering ample power for any type of headphones. RF-filtered and TRS balanced Line outputs for speaker monitoring. USB POWERED Connect to your computer with the included USB cable and record with the included Cubase LE software. No need for a power supply… so you can record anywhere you can take your laptop.

From the Manufacturer

Now you can record anywhere that you carry your laptop. The Lexicon Alpha USB Audio Interface is a complete hardware and software solution that turns your computer into a portable, professional 24-bit/48 kHz digital recording studio. It offers a 2x2x2 USB I/O mixer which is powered directly from the USB bus and includes Steinberg Cubase LE4 recording software, plus world-renowned Lexicon reverbs via the Pantheon VST plug-in. Front panel controls let you adjust Direct/Playback mix and input levels, toggle monitoring between stereo and mono, plug in an instrument directly, and monitor with headphones.

The Alpha Studio features one XLR low-noise microphone input, two TRS line inputs, a hi-Z 1/4″ instrument input and two TRS and RCA line outs. The 1/8″ high powered headphone output can be used with professional or consumer headphones. Conveniently powered directly from the USB bus, the Alpha Studio can stream two channels of 44.1 or 48 kHz audio at either 16- or 24-bit resolution to Mac or PC computers. Users can record two tracks at once from two input sources. The microphone and line inputs have individual level controls and peak meters which are summed at the analog-to-digital bus. As with all recording solutions from Lexicon, the Alpha Studio hardware can be used with almost any recording software the user prefers.

Cubase LE4 integrates seamlessly with the Alpha I/O Mixer to achieve an easy-to-use, 48-track complete recording solution that includes all of the modules that you need to track, edit and mix your masterpiece. Then, to complete your mix with that legendary “Lexicon Sound”, Alpha includes the Lexicon Pantheon VST Reverb plug-in which offers 35 factory presets and 6 reverb types.

The Lexicon Alpha USB desktop recording studio makes it easy to record, arrange, edit and mix your music.

FOUR INPUTS: RECORD UP TO TWO TRACKS AT ONCE!

• Stereo line inputs for keyboards, drum machines or analog output of a CD/MP3 player. RF-filtered TRS active-balanced inputs accept either balanced or unbalanced signals.
• Low-noise mic preamp with balanced XLR inputs.
• High-impedance front panel input for electric guitar or bass.

PROFESSIONAL MIXER FEATURES

• Separate mic and line level input controls with individual peak indicators.
• Monitor mix control for balancing an audio source between live input and playback mix level while recording. Can be switched to stereo or mono.
• High-powered headphone amp offers ultra-clear fidelity while delivering ample power for any type of headphones.
• RF-filtered and TRS balanced Line outputs for speaker monitoring.

USB POWERED

• Connect to your computer with the included USB cable. No need for a power supply…so you can record anywhere you can take your laptop.

Lexicon engineers are constantly working to improve the quality of our products. Specifications are, therefore subject to change without notice.

To compare this product to other products of the same line, please click here.

The Alto Professional Live 1202 is a pro 12-channel, 2-bus mixer equipped with the tools you need to create the perfect mix.

With flexible routing options and a multitude of onboard DSP tools, Live 1202 fits the demands of nearly any live performance environment. It features 7 balanced XLR inputs with switchable phantom power, 3-band EQs, 2 aux sends per-channel for external effects and monitoring, and a 9-band graphic EQ for main or monitor outputs.

A headphone jack with an independent level control enables additional monitoring and mixing. 60mm faders with LED meters provide precise control and visual feedback for accurate, hands-on mixing.

Live 1202’s high headroom results in cleaner mixes, a purer signal path, and loud, punchy audio. Onboard analog compression (channels 1-4) helps control dynamics and gel instruments together for a cohesive, defined mix.

Record your mix directly to a Mac or PC with a single USB connection. Live 1202’s built-in USB port allows engineers, producers, and performers to convert two channels of 24-bit audio straight to a computer. Record live performances, band practices, theater performances, speaking events, and any other live sound event onto your computer for additional editing, mixing, and post-production. The USB connection is bi-directional, enabling sound files stored on your computer to be streamed to and played through Live 1202.

Select from 100 premium 24-bit Alesis DSP effects that give you additional creative control in any mixing environment. Choose from room and space delays, small and large hall acoustics, plate and spring reverbs, flangers, choruses, and more. Often, live sound environments are dimly lit and offer poor visibility to the mixing engineer. Live 1202 solves this problem by color coding each section of the mixer and providing brightly colored knobs so you can quickly and easily find what you need to adjust.

Frequently Asked Questions

Can I use an Alto Live mixer to record into my computer?

Yes! Every Alto Live mixer has a USB connection that carries 2 channels of audio from the MAIN output channel of the mixer to your computer. The USB connection also allows you to send audio from your computer back to the last channel of the mixer. 

What is the ratio of the built-in compressor?

The built-in compressor is a 3:1 fixed ratio.

How is the built-in compressor controlled?

The COMP knob controls both the threshold and makeup gain for the compressor. 

If I want to use an Alto Live series mixer in another country do I need a new power supply?

All Alto Live mixers have an auto-switching power supply built in. As long as you have the proper IEC power cable for the current you intend to use, the mixer will function.

How come my tablet or smartphone isn’t charging when I plug it into USB port on top of my Alto Live mixer?

The USB power outlet on the top of all Alto Live mixers is a 5V 1A power supply and may charge your personal devices slower than a proper outlet. To optimize the charging speed of your device, try lowering your screen brightness and closing unused applications.

Why can’t I hear any audio from the headphone output?

Alto Live mixers allow you to send the main mix to either the CTRL OUT or PHONES output, but not to both at the same time. If you do not hear any signal coming out of your headphones, make sure that MAIN OUT is selected by depressing the button above the headphone volume knob.

What is the DFX BYPASS jack for?

This input allows you to use a standard 1/4″ latching-style footswitch to toggle the mixer’s internal effects processor. 

What does the green SIG light indicate?

When the green SIG light blinks on a channel, it means that a level of 2dBU has been reached. For optimum performance, try to only have this illuminate at your signals highest peaks. 

At what level does the red clipping light illuminate?

The red clipping light will illuminate when your signal has reached +20dBU. 

Further Technical Support

Whether you are a customer or dealer, if you already own a Alto Professional product, or if you have pre-sales or parts questions, the Alto Professional technical support team is available to help!

Each product has a dedicated support page on the website where you can find manuals, specifications, software updates, and troubleshooting guides: www.altoproaudio.com

Visit the link below to connect with any of the following support options: online community support, phone support, email support.

• altoproaudio.com/support 

Technical Specs

Mono Input Channels

• Microphone inputs: Electronically balanced, discrete input configuration
• Frequency response: 20 Hz to 20 kHz, +0.5 dB
• THD+N: <0.02% at 0 dBu, 1 kHz
• Gain range: 0 dB to 45 dB (Mic)
• SNR: 90 dB

Line Inputs

• Electronically balanced
• Frequency response: 20 Hz to 20 kHz, +0.5 dB
• THD+N: <0.03% at 0 dBu, 1 kHz
• Sensitivity range: -15 dBu to 30 dBu

Impedances

• Microphone inputs: 51.1 KΩ
• Channel insert return: 200 KΩ
• All other inputs: >100 KΩ
• 2-Track outputs: 10 KΩ
• All other outputs: 20 KΩ

Equalization

• High-shelving: ±15 dB @ 12 kHz
• Mid-bell (mono): ±15 dB @ 2.5 kHzLow-shelving: ±15 dB @ 80 Hz
• Main EQ: 9 EQ bands (63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz), ±15 dB

DSP Section (DFX)

• A/D & D/A converters: 24-bit
• DSP Resolution: 24-bit
• Effects: 10 DSP effects families with 10 variations available per family
• Presets: 100 total
• Controls: Rotary encoder to select preset, DSP mute switch, peak LED indicator

Main Mix

• Noise (bus noise):
  • Fader 0 dB, channels muted: -64 dBr (ref: +4 dBu)
  • Fader 0 dB, all input channels assigned & set to unity gain: -64 dBr (ref: +4 dBu)
• Phantom Power: Mic Pin2/Pin3 and Pin1 47±2V

Power Supply

• Main voltage: 100-120 VAC ~60 Hz
• Power consumption: 50 W
• Fuse: 1.25 A
• Main connection: Standard IEC receptacle

Dimensions (width x depth x height)

• 1” x 13.6” x 3.1”

Weight

• 0 lbs

Product Description

PylePro Model : PP555

Phono Turntable Pre-Amplifier

Ultra Compact Phono Turntable Pre-Amplifier w/ 9V Battery Compartment

Features:

What’s in the Box:

Technical Specs:

This electronic preamplifier stands up to the test and will provide you with serious sound performance. The PP555 is perfect for bringing your studio equipment’s phono-level output to a more suitable line-level output. Compact preamp features include 9 Volt Battery Compartment, Dedicated RCA 1/4-Inch Output Connectors and power Adaptor. It’ll take your audio signal, amplify its strength and prepare it for further processing by your studio equipment. Pre-amps technically provide voltage gain to your desired equipment and are key to assisting the signal source, whether it’s a turntable, musical instrument or microphone. The ultra-low noise audio conditioning circuitry allows the pre-amp to boost audio to levels that are more manageable for various types of audio equipment. You’ll find it easier to adjust the recording level volumes of different sources from microphones and instruments alike. You should position your preamp close to the source to reduce unwanted noise and interference. Pre-amps can sometimes come built into the stereo equipment, but if that’s not the case, the PP555 is an easy install, wise choice and great addition to any musician or producer. Take your sounds and audio production skills to the next level with the PP555 Phono Turntable Preamplifier.

From the Manufacturer

&

	PP444	PP555	PP999	PHE300	PHE400
	Turntable / Phono Pre-Amplifiers			Noise / Hum Eliminators
Jacks	RCA & 1/4”	RCA & 1/4”	RCA	1/4” TRS	1/4” TRS & XLR
12V DC Adaptor	&#10004	&#10004	&#10004

10-channel Analog Mixer with 4 Microphone Preamps, 3 Dedicated Stereo Line Channels, 1 Aux Send, EQ, 1-knob Compressors, and Digital Effects

The Mackie ProFX12v2 12-channel USB mixer means you can stop sacrificing sound quality for portability at your smaller band and solo acoustic gigs. You get six of Mackie’s Vita preamps for your mic, guitar, keyboard, or anything else you need for your show. After you’ve plugged in, tap into the powerful ReadyFX effects engine to add excitement to your mix. Show your audience you care by giving them the best sound you can with the Mackie ProFX12v2 USB mixer. Like the name says, the ProFX12v2 is a professional mixer, with convenient features and sound that rival some larger format mixers. Mackie designed the Vita preamps with live sound in mind to provide the quality of sound that is lacking in some compact mixers. Each channel features its own individual 3-band EQ and 100Hz low-cut filter for shaping the sound of your inputs. The ReadyFX digital effects engine gives you access to 16 different effects including reverbs and delays – Mackie even added chorus effects for your guitar. A 7-band graphic EQ can be assigned either to your main outputs so you can fine tune the PA, or to the aux output to easily get rid of feedback in your monitors. If you perform with backing tracks, there are inputs (including USB) for your laptop or MP3 player, a headphone output with individual level control, and even phantom power for your condenser mics. With the added convenience of a hi-Z input for direct instrument input, you have no reason NOT to own a ProFX12v2. The ProFX12v2 is exactly what you need for mixing when the gig calls for minimal inputs, but that’s not where its usefulness ends. Since you’ll be mixing from the stage, keep the ProFX12v2 right next to you, and you can use the headphone output with a set of in-ear monitors for your performance and just leave your floor monitors at home. Drummers can use it for monitoring, too – take the aux mix from the front of house board that would have gone to your wedges and plug it in to a channel on the ProFX12v2.