Mpow Ground Loop Noise Isolator for your Car Audio System/Home Stereo with 3.5mm Audio Cable.

Eliminating Humming Noise

If you’ve got your radio, iPod, MP3 player, Bluetooth receiver or similar audio equipment plugged into your car stereo with an audio cable and you’re getting audio hum noise caused by ground loops, you need this isolator work together so that you can enjoy high quality music. Forget about the annoying noise!

Support

We value our customers very much. Please give us the opportunity to help resolve your issues, in case you have concerns or problems with your order, Please contact us for support.

Package Detail

1x Mpow Ground Loop Noise Isolator;
1x 3.5mm Audio Cable;

Warranty

Every Mpow Product includes a 45 days money back & 18-month worry-free guarantee!

· Two Channel
· Compact Design
· Designed to Eliminate Ground Loop Noise
· Reduces Humming and Buzzing Noises

Product Description

Pyle Model : PLG6.3

6.5 inch Component Car Speakers

6.5” 280 Watt Three-Way Speakers

Get in gear with the Pyle Gear series! These speakers are designed to provide the best quality sound for the budget-minded enthusiast. These 6.5′, three-way speakers have 280 watts of pure power, supported by a super film tweeter for sweet highs, 0.5′ neodymium dome for mids, and a high temperature voice coil to round out the low end. The non-fatiguing butyl rubber surround and yellow-color poly-injected cone provide a sturdy foundation for keeping your sound crystal clear and distortion-free. The 40 oz. magnet structure allows these speakers to achieve a frequency response of 60 Hz to 20 kHz. To boost performance, these speakers have been equipped with a strong capacitor, meaning your speakers will never struggle for power. These speakers look cool, too, thanks to the yellow coated steel basket. Includes custom grills, wires, and installation hardware. You’ll hear everything you were meant to hear with Pyle Gear.

From the Manufacturer

&

	PP444	PP555	PP999	PHE300	PHE400
	Turntable / Phono Pre-Amplifiers			Noise / Hum Eliminators
Jacks	RCA & 1/4”	RCA & 1/4”	RCA	1/4” TRS	1/4” TRS & XLR
12V DC Adaptor	&#10004	&#10004	&#10004

Blue Jeans Cable Subwoofer Isolation Transformer / Subwoofer Hum Eliminator

A good subwoofer can transform the home theater experience by adding a movie-theater feel to your surround sound system. But a powered subwoofer, built to amplify low-frequency sounds and effects, is also susceptible to one of the most vexing home theater problems: hum.

Troubleshooting Subwoofer Hum:

There are a few possible causes of subwoofer hum: (1) internal noise from the power supply, (2) induced hum in the subwoofer cable, (3) hum getting into the signal path prior to the subwoofer cable, and (4) “ground loop” hum from a difference in ground potential at the source and the sub. This transformer will eliminate (4), the most common cause of subwoofer hum, but will not resolve the others.

Specific troubleshooting tips:

– Cause (1), a bad subwoofer power supply, can be checked by simply unplugging the input cable from the sub and seeing if hums with no input.

– Cause (2), induced hum in the subwoofer cable, is normally caused by the cable being too close to power cords — check cable spacing.

– Cause (3), hum getting into the signal path prior to the sub cable, is harder to diagnose, but usually the way to proceed is to test what happens when you switch or disconnect individual sources from your amp.

If the more common ground-loop issue, (4) above, is your only problem, this transformer will resolve it. This isolation transformer is a quality, US-made audio transformer which eliminates the need for a straight-through ground/ground connection between your receiver and your powered subwoofer. With the grounds on both sides isolated from one another, ground current won’t flow down the shield; the result is elimination of ground loop hum. We recommend it be used with Blue Jeans Cable LC-1 subwoofer cables, which are heavily shielded to reduce induced noise, for a truly quiet, low-noise-floor subwoofer.