Best Monoprice 6 Zone Home Audio Multizone Controller And Amplifier Kit

Get the most out of your home audio system with high quality oxygen-free copper speaker wire from Monoprice!. This wire features two conductors made of high purity (greater than 99. 95% pure) oxygen-free copper. One side of the clear outer PVC jacket is marked with a blue stripe to indicate polarity.

Unity 200-Watt Bridgeable Power Amp

Multiroom audio systems are in high demand these days. Homeowners and businesses have their own idea of what they want. Sometimes the all-in-one does not meet the need of the client.

This 2-channel class D power amplifier features a stereo speaker output, with support for 4-ohm and 8-ohm speakers. It can deliver 100 watts per channel into 8-ohm loads or 125 watts per channel into 4-ohm loads. Additionally, the output can be bridged to provide 225 watts to a single 8-ohm speaker. It includes a buffered loop line output of the original signal for driving another power amplifier in distributed whole house audio systems. The amp can be configured for always on, signal detection, or triggered power on status. It also includes a 12-volt trigger output for controlling other devices.

Features:
• Class-D amplifier providing 100 watts/channel (RMS) into 8 ohm loads or 125 watts/channel into 4-ohm loads
• Bridgeable output provides 225 watts into a single 8-ohm load
• 4-pole detachable speaker screw connector (Phoenix connector) with support for up to 12 AWG speaker wire
• 12-volt trigger input for power-on/off
• 12-volt trigger output for controlling other devices
• Buffered loop output of original signal for connection additional amplifiers
• Rear panel volume gain adjustment
• Built-in thermal and short circuit protection circuits
• Includes rack-mount ears for mounting a single amp or two amps side-by-side

Unity 100-Watt Bridgeable Power Amp

Multiroom audio systems are in high demand these days. Homeowners and businesses have their own idea of what they want. Sometimes the all-in-one does not meet the need of the client.

This 2-channel class D power amplifier features a stereo speaker output, with support for 4-ohm and 8-ohm speakers. It can deliver 50 watts per channel into 8-ohm loads or 65 watts per channel into 4-ohm loads. Additionally, the output can be bridged to provide 120 watts to a single 8-ohm speaker. It includes a buffered loop line output of the original signal for driving another power amplifier in distributed whole house audio systems. The amp can be configured for always on, signal detection, or triggered power on status. It also includes a 12-volt trigger output for controlling other devices.

Features:
• Class-D amplifier providing 50 watts/channel (RMS) into 8 ohm loads or 65 watts/channel into 4-ohm loads
• Bridgeable output provides 120 watts into a single 8-ohm load
• 4-pole detachable speaker screw connector (Phoenix connector) with support for up to 12 AWG speaker wire
• 12-volt trigger input for power-on/off
• 12-volt trigger output for controlling other devices
• Buffered loop output of original signal for connecting additional amplifiers
• Rear panel volume gain adjustment
• Built-in thermal and short circuit protection circuits
• Includes rack-mount ears for mounting a single amp or two amps side-by-side

10 Pair Affinity Series 24k Gold Speaker Banana Plug
Monoprice Affinity Series Banana plugs make speaker installations easy. They are designed for use with amplifiers or speakers that use binding posts.
These high quality plugs feature a dual screw fastening system that can accept bare speaker wire from 10 to 18 AWG. Each pair comes with one plug color coded red and the other coded black, for easy polarity identification.
The plug body is made of copper fitted with a ferromanganese tip. The entire plug is then plated with gold to help prevent corrosion.
Features:
• Can accept bare wire and spades
• Color coded black/red rings for maintaining proper polarity
• Secure, positive contact with binding posts
• Corrosion resistant, 24K gold plated finish
• Copper body construction and ferromanganese tips

The mvr-100 is a rotary-type wall plate volume control for speaker systems with power ratings of up-inch 100 watts per channel and impedance ratings of 4-inch 16 ohms. This rotary control can be set-inch one of twelve positions including the minimum (off) and maximum volume settings. The wall plate mounts into a standard single-gang low-voltage wall bracket (not included) and has inputs and outputs for one pair of stereo speaker wires (4 input connections and 4 output connections). It can accept speaker wire in sizes from 14-inch 16 gauge and provides a frequency response range of 35 he-inch 20 kHz (+0/-2dB) at the full power rating of 100 watts per channel. Please note: this volume Control does not include a wall mounting bracket. Moonrise has everything you need-inch enhance your home theater system! You may also want-inch consider: low-voltage mounting brackets and wall-plate accessories in-wall speakers for a professional home theater looking-wall CL2 rated speaker wire

Wirelessly control and listen to all your favorite music using your Bluetooth enabled mobile device and your home audio system with this Home Theater Music Receiver from Monoprice!

This Bluetooth receiver includes a standard 3.5mm and optical toslink output, so you can connect it to virtually any home theater system. You can connect up to 8 Bluetooth devices to the receiver at a time, and control the music from up to 33 feet away!

An AC adapter is included so you never have to worry about switching out batteries or the receiver dying in the middle of your favorite songs. A 6foot 3.5mm cable is included in the box as well as a 3.5mm female to 2xRCA male adapter cable. The Bluetooth receiver measures at 2.75″ x 3″ x 0.8″ so it is compact enough to fit next to your sound system without being too obtrusive.

Near Field Communications (NFC) is also supported through the receiver. Any phone with NFC support can be connected by simply placing it on top of the receiver to pair it.

*** 30-day easy returns. No restocking fee. Free lifetime technical support. 1 year warranty. ***

Drop ceiling speaker brackets for in-ceiling installation in commercial facilities with paneled ceilings.. For use with product ID 4104 (mst-870-2y). this product is not compatible with product ID 4929 (mst-825a).

Spread Your Music Everywhere. One of the most popular trends in Home Audio is whole house audio distribution. Unfortunately, true multi-zone distribution systems are normally built into only the higher end receivers or require an expensive audio distribution network. Monoprice brings everything within reach of the average homeowner by offering a wide selection of Home Audio Distribution accessories. A Key element of any home audio distribution system is a speaker selector. The speaker selector allows you to distribute your source signals to several sets of speakers distributed throughout your home. Additionally, a good speaker selector like our 2-channel A/B selector listed here, will allow you to have different source audio sent to different rooms so that someone in one room can be listening to something different in another room. Most importantly, a speaker selector provides impedance matching, which ensures that the additional speakers do not overload or damage your amps. The Monoprice MSV-2 is a dual source 2 zone speaker selector with built in independent volume controls for each source. This device can handle up to 100 watts per channel. It supports a frequency range of 20Hz to 20kHz. Accepts wire gauges up to 14AWG and maintains load at 8ohms. Installation is straight forward and simple. This is part of making your dream sound system into a reality.