Best Home Subwoofer Mono Amplifier
Nowadays, there are so many products of home subwoofer mono amplifier in the market and you are wondering to choose a best one.You have searched for home subwoofer mono amplifier in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings home subwoofer mono amplifier which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Nobsound G2 Subwoofer Amplifier & Mono Power Amp, PBTL/BTL Bridge, 100W Mini Sub Amp for Home Theater
- 【Hi-Fi Amp with Clean Sound Quality】M03 subwoofer amp adopt with the Instruments TPA3255D2 chip, can provide 300watt output power for 4-8ohm subwoofer or speaker. No pop, no audible noise, dead silent when nothing is playing through it.
- 【Full-Frequency and Sub Bass Switchable 】With a selector can be switched to subwoofer bass amplifier or full frequency mono amp, can be connected to passive suboower, passive speaker or active subwoofer.
Subwoofer Amplifier 300 Watt Mini Mono Audio Amp Full-Frequency and Sub Bass Switchable Amplifier One Channel Home Theater Single Power Subwoofer Amp Fosi Audio M03
- ❤ 【Hi-Fi Amp with Clean Sound Quality】M02 subwoofer amp adopt with the Instruments TPA3116 chip,NE5532 op-amp, can provide 100watt output power for 4 ohm subwoofer or speaker. No pop, no audible noise, dead silent when nothing is playing through it.
- ❤ 【Full-Frequency and Sub Bass Switchable 】With a selector can be switched to subwoofer bass amplifier or full frequency mono amp, can be connected to passive suboower, passive speaker or active subwoofer.
Fosi Audio Subwoofer Amplifier Mono Channel Amp Home Theater Power Amplifier 100W M02
- Come with 19V power adapter that can be carefully matched with this home mono integrated amp physically as well as electrically
- Adopt Texas Instruments TPA3116 chip, NE5532 op-amp. No pop, no audible noise, dead silent when nothing is playing through it
- Built-in low pass filter,100W X 1(4 ohms, 20 Hz - 120Hz, 0.04% THD, 18db/octacce) for subwoofer, Small simple compact design but practical and powerful
Subwoofer Amplifier Receiver 100Watt Mini Hi-Fi Digital Class D Integrated Stereo Audio Amp for Sub Bass + Power Supply TP-01
- 2x75 WATT POWER: The Pyle Dual Channel Audio Amplifier is perfect for your home theater acoustic surround sound system. Gives you 2x75 watts peak power which can be used for subwoofer speakers w/ 4-8 ohms impedance, enjoy high quality music and movie
- MULTIPLE SOURCES: This small personal portable digital amp box lets you connect external audio sources such as tuner, CD DVD player, tape deck, camcorder, VCR to the 3.5mm RCA (L/R) LINE input and enjoy enhanced amplified acoustic audio reproduction
Quick tips:
1. Please plug the power cord into the amp THEN the wall, plug the audio cables into amp THEN switch on.
Some customers may see some slight sparks flying when they plug the power supply into the amplifier, because they use it in wrong way, you need to connect the amp to the power supply first, then plug the power supply into the 110v AC outlet, don’t worry about the sparks, because this is class d amplifier, the capacitors need to charge when the power in, it’s normal and safe.
Parameter:
1. Power supply range: 12v-24v;
2. THD: ≤ 0.04%;
3. Frequency Range: 20Hz – 120Hz (±1 dB);
4. SNR: ≥ 98dB;
5. Input sensitivity: ≤ 280mV;
6. Terminating impedance: 2Ohm – 8Ohm;
7. Output power: 100W for Subwoofer;
8. Input mode: 3.5mm audio input;
9. Power supply: 19V 4.74A 90W;
10. Supplied Accessories: Amplifier, Power supply, AC power cord, Manual.
Home Audio Power Amplifier System – 2X75W Mini Portable Dual Channel Surround Sound Stereo Receiver Box w/ LED – For Amplified Subwoofer Speakers, CD DVD Player, Theater via 3.5mm RCA – Pyle PCA3
- This subwoofer amplifier adopts brand-new TI TPA3116D2 amplifer chip, which can offer 100W powerful output and 90% efficiency.
- Compared with other similar products on the market, it also uses a NE5532 buffer op-amp to achieve more powerful performance.
- Its super mini size can be easily hold by one hand, which will be a good match for your desktop.
- Power supply (not included, search ASIN: B074J81XRB to get one): DC 8-25V; at least 3A; higher voltage and current within the limitation would bring higher power
Product Description
The PCA3 mini stereo power amplifier from Pyle provides up to 75W of power on each channel at 4 Ohms. Connect your inputs using the RCA jacks, and output an amplified audio signal over standard speaker push jacks. It’s compatible with any audio or computer device–you can even hook up an iPod using a 3.5mm to RCA jack converter. A master volume control on the front lets you adjust the gain, and treble, bass, and volume controls on the front let you tweak your sound to exactly how you want it. The PCA3 runs on 110V or 220V with a voltage selector switch.
From the Manufacturer
Click here for a larger image
Click here for a larger image
Click here for a larger image
Click here for a larger image
The Ultimate Stereo Power Amplifier
This amplifier gives you the power and versatility you need to create a professional sound system. Its wide frequency response makes it suitable for amplifying any type of audio including music or vocals. It can be used in meeting halls, restaurants, schools, stores, and at home –the perfect solution for paging systems anywhere. Get the power you need with 2 x 75 Watt to handle all your audio needs.
110/220 Voltage Selector
This amplifier has selectable input voltage from 110 V/60 Hz (the standard in USA and Canada) to 220 V/50 Hz (for European operation). Please make sure the switch is in the proper position before operating.
Compatibility
Compatible with CD players, walkmans, and computerized devices, including MP3s, via 3.5 millimeter to RCA converter.
RCA L/R Line Input
Lets you connect the desired line input source.
Take Control
Use the control center panel located on the face of the unit to make adjustments to microphone volume, master volume, balance, bass, and treble.
Push Type Speaker Terminals
Lets you easily connect speaker wires directly to the amplifier.
Replaceable Power Fuse
The amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse and replace it if necessary. (Replacement fuse to use: 1.5-amp, 250-volt, fast-acting 5 x 20 millimeter fuse –not included)
Additional Features
- Harmonic Distortion: 0.3%
- 2 x 75 Watt RMS at 4 Ohm
- Blue LED Output Level Display
- Frequency Response: 20 Hz-40 kHz
- Power Fuse: 1.5 A, 250V Fast-Acting (5 x 20 millimeter)
- Power Requirement: 120 V AC 50 Hz/230 V AC 50 Hz
- Tone Controls: Bass and Treble: +/-10dB (100 Hz/10 kHz)
- Dimensions: 8.27 x 2.72 x 5.39 inch (190 x 70 x 137 millimeter)
Nobsound 100W Subwoofer Digital Power Amplifier Audio Mini Amp (Subwoofer, Black)
- Adopt Texas Instruments TPA3255 chip, NE5532 op-amp. No pop, no audible noise, dead silent when nothing is playing through it
- 300W Mono integrated class D amplifier with 32V/5A large power supply
- Simple compact design,And the exterior design is delicate and beautiful
- It can match with computer/ desktop /Home theatre system and so on
- Can connect to both passive and active subwoofers
Parameters:
- Audio input: 3.5mm
- Audio output: Banana plug
- Power supply: DC 8-25V; at least 3A
- Maximum power: 100W
- Chip: TPA3116D2 + NE5532
- Weight: 0.35Kg; 0.2Kg (without package)
- Dimensions: 68.5 * 33 * 90 mm (not including terminals)
Packing List:
- 1 * amplifier
AIYIMA 300W Subwoofer Amplifier TPA3255 HiFi Mono Audio Power Amplifier Class D Amp NE5532 Sub Plate Amplifier with Bass Treble Adjust DC 24V-35V TPA3255(Black-300W)
- Built-in low pass filter, 220W X 1(4 ohms, 20 Hz - 120Hz, 0.04% THD, 18db/octacce) for subwoofer, Small simple compact design but practical and powerful
- Advanced circuitry design, built-in speakers protection circuit, solid aluminum chassis for long time use
- Adopt Texas Instruments TDA7498E chip, NE5532 op-amp. No pop, no audible noise, dead silent when nothing is playing through it
- Home Hi-Fi mono integrated class d amplifier, Exclusively designed for the customers who pursue HiFi sound
Subwoofer Amplifier TDA7498E Mini Sub Bass Amp Digital Class D Integrated Subwoofer Amplifier 220Watt x 1 Fosi Audio TP-02
- The SMP500 is designed for use with higher wattage passive subwoofers that require external power with up to 1000 watts power peak / 400 watts RMS with 4 ohms. It has highly efficient Class D technology to run cool under demanding loads.
- SOUND QUALITY: Get a deep, crisp, clean low-frequency sound effect in dedicated home theater systems and media rooms to improve the overall sound quality of surround sound systems with dual 100/220 voltage.
OSD Audio 1000W Mono-Channel Class D Subwoofer Amplifier – Onboard DSP, 4-8 Ohm – SMP500
- 100W Subwoofer Amplifier Board
- Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz
- Operating voltage range: DC 12-24V(maximum voltage is no more than 24V)
- built-in TPA3116 amplifier chip
- This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board.
- DC 12-24V power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Maximum support 100W (Bass) bass channel output
AOSHIKE TPA3116 DC 12-24v 100W Subwoofer Amplifier Board Support Bass Output Digital Small Power Amplifier Board Video Audio Accessories
- Theater Solutions SA200 subwoofer amplifier for an in wall passive Sub, 200 watts peak power, frequency response is 50 - 200Hz, Output Impedance is 4 or 8ohm
- Sub volume and crossover control knobs, LFE and RCA inputs for use with a home audio receiver, raw wire outputs, power supply is AC 18V, fuse is 3a/ 250V
- Dimensions (hxwxd) are 2.25" X 8.5" X 6", 6 foot RCA cable, "Y" Adapter, power supply and full instructions included
Theater Solutions SA200 Passive Subwoofer 200 Watt Amplifier for Home Theater
- 2000-WATT POWER: The Pyle 4 Channel Pre-Amplifier is perfect for your home entertainment system. It gives you 2000 watts peak power to be used for multi speakers w/ 2-8 ohms impedance allowing you to enjoy high-quality audio
- BLUETOOTH ENABLED: The integrated hybrid amplifier is equipped with Bluetooth for wireless music streaming. Works with today’s latest devices including smartphone, tablet, laptop, computer, etc. Features a built-in 2.4GHz antenna for extended range
This Theater Solutions SA200 is the perfect solution to power your passive in wall subwoofer. It’s rugged and compact design makes it an easy addition to your home audio setup. Features include: LFE and RCA inputs, gain and crossover controls, and raw wire speaker outputs. This safe-200 Works with almost all home audio receivers with subwoofer outputs and will deliver plenty of bang for the buck!
Pyle 4-Channel Bluetooth Home Power Amplifier – 2000 Watt Audio Stereo Receiver w/ Speaker Selector, AM FM Radio, USB/ SD Card Reader, Karaoke Microphone Input – Home Entertainment System
Pyle Model : P2203ABTU.5
Bluetooth Stereo Receiver for Speakers, Wireless Speaker Amp, Home Theater Stereo Amp Receiver, USB/SD/MP3/AUX/AM/FM, 2000 Watt
Features:
Bluetooth Connectivity:
What’s in the Box:
Technical Specs:
The Pyle P2203ABTU is the perfect solution if you are looking for a high-fidelity pre-amplifier and a power amplifier all in one. This receiver / pre-amp is equipped with Bluetooth for wireless music streaming, two sets of RCA inputs, RCA line out for recording, RCA preamp out, 2 mono RCA’s for subwoofer output, iPod and MP3 player input via 3.5mm cable. Plus, a USB port for plugging in your favorite digital music in MP3 format. Features separate gain control for preamp and subwoofer channels which make it easy to fine tune the levels of your audio. The P2203ABTU produces 2000 watts peak power, with 600 watts @ 2 ohms, 460 watts @ 4 ohms, and 240 watts @ 8 ohms. Pyle has been in business for over 35 years, and their manufacturing experience and expertise is easy to see – and hear!