chitahome 
Nowadays, there are so many products of 12″ direct wire under cabinet lighting in the market and you are wondering to choose a best one.You have searched for 12″ direct wire under cabinet lighting in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 12″ direct wire under cabinet lighting which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
GE 12 Inch Premium Front Phase LED Under Cabinet Light Fixture, Direct Wire, In-Wall Dimmer Compatible, 3000K Bright White, Steel Housing, 496 Lumens, 26739
Amazon.com
- 12-Inch metal LED light bar is fully assembled and ready to install right from the box, hardware and instructions are included
- Powered via direct wire and shines at high-powered bright 600 lumens. Works with most in wall dimmers, great for kitchen, home, office, garage, basement, barn, workbench, and more.
- LED lights means long life, no bulbs to replace and energy efficient. Selective white color, choose between a soft warm white, a bright cool white, or daylight. Unlike other LED’s, Enlighten LED’s show natural true color intensity and vibrance.
Add a light to the hard to see places in your kitchen with a Premium LED Direct Wire Light Fixture from GE. Perfect for providing under cabinet lighting in your kitchen, home office, or studio, the 12-inch light fixture features full range front phase dimmability, helping you control the threshold of light in your home. Even though the fixture is a high-powered LED light source, it has minimal power consumption with a life of 50,000 hours of LED power. The LED fixture is cool to the touch, will never overheat, provides an even diffused, soft white light, and there are no bulbs to replace. This metal fixtures includes all mounting hardware and instruction manual for easy installation. This product is UL listed and is backed by a lifetime warranty.
GE Enbrighten 12 Inch LED Premium Under Cabinet Light Fixture, Direct Wire, Selective Color, 600 Lumens, Steel Housing, On/Off Switch, In Wall Dimmer Capable, Natural True color, Kitchen & Home 34285
Amazon.com
- Flush mount or surface mount, each light fixture produces ~350 lumens with a 120 degree beam angle
- Requires a 12 volt DC power Supply, sold separately
- Uses only 4 watts at 100% brightness
- Each light comes with a 36 in. Power lead
- For RV and boat interiors, can be powered directly by a 12-volt battery, AC/DC power Supply not required
Add a light to the areas in your home that need extra light with a GE Enbrighten LED Direct Wire Light Fixture with Light Color selection. Perfect for providing under or over cabinet lighting in your kitchen, home office or studio, the 18 in. light fixture features full range front phase dimmability, helping you control the level of light in your home. This fixture also allows you to select from a Warm White, Cool White or Daylight light color. This fixture is a high-powered LED light source and has minimal power consumption with a life of 50,000 hours (34 years at 4 hours of usage per day) of LED power. The LED fixture is cool to the touch and provides an even diffused light, with no bulbs to replace. This metal fixture includes all mounting hardware and instruction manual for easy installation. This product is UL listed and is backed by a Limited-Lifetime Warranty.
Armacost Lighting 213411 2700K Purevue Dimmable Led Puck Light, Soft White
Kichler 10580WH TaskWork Direct Wire 12IN 2LT 12V Xenon Undercabinet Light, White Finish with Frosted Glass Diffuser
Amazon.com
- GUILT-FREE energy usage, only 8W! 12-inch LED light bar with wide area light distribution for use in closet spaces, cabinet, counters, shelves, bookcases and displays
- GLARE-FREE frosted lens makes it easy on the eyes with warm bright light. Perfect size to fit under that one narrow cabinet. Great companion to our other 18-inch, 24-inch and 48-inch options.
- DIMMABLE - Compatible with most dimmers. CRI>
Product Description
Kichler Lighting 10580WH TaskWork Direct Wire 12IN 2LT 12V Xenon Undercabinet Light features a durable White Powder Coat finish and Easy-Lock Poly-Tempered Frosted glass diffuser. This Series II Cabinet Light is perfect for almost any application. It includes an easy to operate on/off hi/low rocker switch, and has a slim 1IN profile which makes it easy to conceal under your cabinet, and it offers fastener-free hinge assembly, and keyhole mounting for easy placement. When thinking of under cabinet lighting, most would think of their use in the kitchen. The benefits are quite extensive, and are useful in the kitchen and other heavily used areas in the home or office. They can illuminate task areas, provide ambient light, and give a pleasant accent light. A couple of less obvious reasons why under cabinet lighting is beneficial are that most under cabinet lighting is energy efficient, and it removes shadows and dark corners in a tight area. The 10580WH is 12.25IN long x 5IN wide x 1IN high. The 10580WH comes one per package, and includes two (2) 18W 12V wedge base Xenon lamps (dimmable using an Electronic Low-Voltage dimmer). Energy saving Xenon lamps have a rated average lamp life of 10,000 hours that evenly distribute light while producing 35% less heat than halogen bulbs. Since 1938, Kichler Lighting has offered a distinctive array of lighting solutions that reflect your individual personality, tastes and plans. Kichler brings you an unparalleled variety of exciting style families, unique finishes, fresh colors and unequaled quality. Whether it’s casual, contemporary, transitional or traditional, you’ll find it with Kichler, lighting that defines your style.
From the Manufacturer
Finish: White, Light Bulb:(2)18w T5 Wedge 12v Xenon Series II Undercabinet Light. Employs a 2-light design that uses 18-watt (max.) Xenon bulbs (included), this Series II Kichler Cabinet Light is perfect for almost any application. It includes an on-off switch, has a slim 1′ profile, making it easy to conceal under your cabinet, and a single BX connector is included with the package. The shade material is made of Plastic and Frosted Glass. (White finish version is 12-1/2′ length.).
Hardwired LED Under Cabinet Lighting – 8 Watt, 12", Dimmable, CRI>90, 3000K (Warm White), Wide Body Undercabinet Undercabinet, Long Lasting Metal Base With Frost Lens
Amazon.com
- At just 1/4 in. Thick, wafer thin LED puck lights provide the look of professional recessed Lighting without cutting any holes, and a 3-3/4 in. Diameter brings greater presence than common puck lights
- Low-voltage safe, a 12-volt power Supply is required (sold separately)
- link together as many lights as needed, the Number is limited only by the output rating of your power Supply
- Fully dimmable with virtually any dimmer including Lutron, Leviton and Alexa compatible dimmers when used with an Armacost Lighting universal dimming LED driver/power Supply
Armacost Lighting 224410 Wafer Puck Light, 3-3/4", 4000K
Amazon.com
- EASY AND SAFE INSTALLATION - innovative, slim design allows for easy retrofit, remodel or new construction installation from below the ceiling. Only need 2" clearance for install
- HIGHLY RATED FOR MULTIPLE LOCATIONS - CSA, IC, Airtight and Wet Location listed make LED Wafer ideal for indoor and outdoor residential, hospitality, commercial and multifamily applications and safe to contact insulation.Tips: Customer should verify that fixture is wired properly and verify that the line voltage at the fixture is correct
Lithonia Lighting WF6 LED 30K MW M6 13W Ultra Thin 6" Dimmable LED Recessed Ceiling Light, 3000K, White
Amazon.com
- CONTROL FROM ANYWHERE - Turn electronics on or off from anywhere with your smartphone using the Kasa app (Compatible w/ Android & iOS)
- VOICE CONTROL - Works with Amazon Alexa, Google Assistant and Microsoft Cortana supported devices for a hands-free experience
- GUIDED INSTALL: No need to understand complex switch wiring or master vs. auxiliary switch configurations. The Kasa app guides you through easy step-by-step installation
The Lithonia Lighting Wafer-Thin LED recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the pot light housing for competitive affordability. This innovative wafer slim Type IC design allows easy installation for new construction or remodel from below the ceiling without the requirement of a pot light housing.
Technical Specifications:
Power: 13W Input Voltage: 120V (Connects directly to power supply via provided UL recognized driver)
Luminous Flux: 1020LM Emitting Color: 3000K(Bright White)
Dimmable: Yes Light Source: LED
CRI: 80 Surface Size: 6.7 inches
Back Hole Size: 5.9 inches Dimension: 6.7 x 6.7 x 1.1 inches
Light direction: Downlight Average life: 36,000 hours
Warranty: 5 years – Limited Electrical: Plenum rated cable connector to connect from module to remote driver box. Isolated driver integrated inside steel remote box with four 7/8″ knockouts with slots for pry-out
Meets Highest Industry Standards: CSA certified in the USA and Canada, Energy Star Rated, IC Rated, Wet Listed and Air Tight More electrical information and complete list of compatible dimmers are located on spec sheet
How many LED lights do I need for the room?
Wafer 6 inch: One unit is needed for about every 2.5sq feet in an 8 ft ceiling room 3 units for a room ranging from 6sq ft – 9 sq ft
4 units for a room ranging from 10sq ft – 12 sq ft 6 units for a room ranging from 12sq ft – 15 sq ft
9 units for a room ranging from 15sq ft – 19 sq ft
Which light colors work for me?
3000K: Used in family homes, hotels, coffee shops and other warm and sweet environments. 4000K: Used in homes with a need of a soft white lighting atmosphere.
5000K: Used in offices, working areas, shopping malls and other commercial areas that needs super bright lighting
Application Areas:
Ideal for new constructions, remodels or retrofit installations. Closets, attics, hallways, bathrooms, kitchens, basements, soffits, entry ways, porches, garages
Stairwells, corridors, nursing/retirement homes, condos, elevators, apartments, and any other small areas
Installation Guide:
1. Double check and measure the ceiling hole. 2. Open the cover of the remote driver box. Push and remove one of the knockouts on the side plate.
3. Connect the remote driver box to the light fixture and tighten nut connector. 4. Place remote driver box through the cut-out hole.
5. Pull the spring clip on the fixture up and through the ceiling hole. Place module in the hole 6. Turn the power on
Installation guide for kit included in the package.
Kasa Smart Light Switch by TP-Link – Needs Neutral Wire, WiFi Light Switch, Works with Alexa & Google (HS200)
Amazon.com
- Works with Amazon Alexa to support dimming through voice control (Smart Bridge required, Alexa device and Smart Bridge sold separately)
- Provides the best dimming performance for LED bulbs. Tested and recommended for use with a wide range of bulbs (for recommended LEDs, please see "Technical Specification")
- Works with up to 100W of dimmable LED/CFL or 300W incandescent/halogen bulbs
- Lamp Dimmer simply plugs into a standard outlet and can be used with up to two lamps
Control your lights, ceiling fans, and other fixtures from anywhere with the Kasa Smart Wi-Fi Light Switch. The smart switch replaces any standard light switch, and connects to your home Wi-Fi in no time through the free Kasa app. Kasa also lets you manage connected fixtures with your smartphone or tablet, including setting schedules, timers and countdowns. For added convenience, you can use your voice to control when paired with Amazon Alexa, Google assistant and Microsoft cortana. Protocols Supported: IEEE 802.11b/g/n; System Requirement: Android 4.1 or higher iOS 9.0 or higher; Wireless Type: 2.4GHz 1T1R
Lutron Caseta Wireless Smart Lighting Lamp Dimmer, PD-3PCL-WH, Works with Alexa, Apple HomeKit, and the Google Assistant
Amazon.com
- 【LE 16.4ft LED Light Strip】: A power adapter is required but NOT INCLUDED, please search 'Lighting EVER B019Q3U72M' on Amazon if you need one.
- 【Easy Installation】: With high quality adhesive tape on the reverse, it can be easily secured in the mounting surface.
- 【Various Shapes Available】: This strip light can be cut every 3 LEDs along the scissors marks, and it is connectable, easy to link by connector (included) and not need to be soldered. you can create a lot of different shapes and length with it.
Conveniently create just the right for reading, watching TV, or entertaining, with the Caseta Wireless plug-in lamp dimmer. The plug-in lamp dimmer simply plugs into a standard outlet and can be used in conjunction with up to two lamps. It works with dimmable LEDs and compact fluorescent (CFL) bulbs, as well as incandescent and halogens. Conveniently control your floor or table lamps with a Pico remote control, sold separately.
LE 12V LED Strip Light, Flexible, SMD 2835, 16.4ft Tape Light for Home, Kitchen, Party, Christmas and More, Non-Waterproof, Warm White
Amazon.com
- EASY AND SAFE INSTALLATION - innovative, slim design allows for easy retrofit, remodel or new construction installation from below the ceiling. Only need 2" clearance for install
- HIGHLY RATED FOR MULTIPLE LOCATIONS - CSA, IC, Airtight and Wet Location listed make LED Wafer ideal for indoor and outdoor residential, hospitality, commercial and multifamily applications and safe to contact insulation
- EXTREMELY BRIGHT DIMMABLE LEDs use 8 watts to provide 550 lumens with an 80 CRI, almost 70 lumens per watt. Dims down to 10% and compatible with select Lutron, Levitron, Synergy and Sensor Switch dimmers
Lithonia Lighting WF3 LED 30K MW M6 8W Ultra Thin 3" Dimmable LED Recessed Ceiling Light, 3000K, White
Amazon.com
- Automatically turns the lights on when you enter the room and off when you leave
- Features XCT sensing technology which detects fine motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently
- Optional: senses daylight so lights do not turn on when there is enough natural light in the room
- Programmable time-out of lights - 1, 5, 15 or 30 minutes
- Works with all bulb types
ASIN: B01NC0A8J3
The Lithonia Lighting Wafer-Thin LED recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the pot light housing for competitive affordability. This innovative wafer slim Type IC design allows easy installation for new construction or remodel from below the ceiling without the requirement of a pot light housing.
Technical Specifications:
Power: 8W
Input Voltage: 120V (Connects directly to power supply via provided UL recognized driver)
Luminous Flux: 550LM
Emitting Color: 3000K(Bright White)
Dimmable: Yes
Light Source: LED
CRI: 80
Surface Size: 3.4 inches
Back Hole Size: 3 inches
Dimension: 3.4 x 3.4 x 1.1 inches
Light direction: Downlight
Average life: 36,000 hours
Warranty: 5 years – Limited
Electrical: Plenum rated cable connector to connect from module to remote driver box. Isolated driver integrated inside steel remote box with four 7/8″ knockouts with slots for pry-out.
Meets Highest Industry Standards: CSA certified in the USA and Canada, Energy Star Rated, IC Rated, Wet Listed and Air Tight.
More electrical information and complete list of compatible dimmers are located on spec sheet
How many LED lights do I need for the room?
Wafer 3 inch: One unit is needed for about every 1.25sq feet in an 8 ft ceiling room.
4 units for a room ranging from 5sq ft – 7 sq ft.
6 units for a room ranging from 8sq ft – 10 sq ft.
9 units for a room ranging from 10sq ft – 12 sq ft.
Which light colors work for me?
3000K: Used in family homes, hotels, coffee shops and other warm and sweet environments.
4000K: Used in homes with a need of a soft white lighting atmosphere.
5000K: Used in offices, working areas, shopping malls and other commercial areas that needs super bright lighting.
Application Areas:
Ideal for new constructions, remodels or retrofit installations.
Closets, attics, hallways, bathrooms, kitchens, basements, soffits, entry ways, porches, garages
Stairwells, corridors, nursing/retirement homes, condos, elevators, apartments, and any other small areas
Installation Guide:
1. Double check and measure the ceiling hole.
2. Open the cover of the remote driver box. Push and remove one of the knockouts on the side plate.
3. Connect the remote driver box to the light fixture and tighten nut connector.
4. Place remote driver box through the cut-out hole.
5. Pull the spring clip on the fixture up and through the ceiling hole. Place module in the hole.
6. Turn the power on.
Installation guide for kit included in the package.
