Best Puck Nickel Under Cabinet Lighting 120V

No more lying under the kitchen cabinet, trying to align the screw holes through tiny holes on the puck light. You now just need to install the metal plate (included in package) onto your cabinet bottom with two screws, then place the puck light where the plate is. The magnetic back plate of the puck light will clasp tightly onto the metal plate.

If you have sheet metal pre-installed under your cabinet bottom, then just take the puck lights out of the package and stick them under the cabinet as you like. You don’t even need to drill holes in your cabinets!

If the light is too bright for your needs, you now have the choice of using its included in-line dimmer to optimize the light output. 10 levels of dimming (full bright to the lowest level) will match all your lighting needs perfectly! Whether it’s accent lighting to showcase your collections, or general lighting under cabinets, this puck light series will do the trick for you. And it also means no extra cost is needed for a separate dimmer.

Product Information:
Color Temperature: 3000K soft white
Construction: Aluminium trim
Diameter: 2-4/5 in.
Height: 1/2 in.
Voltage: 12V
Lumens: 660
CRI: 90+

Designed in California, this is simply put the best in its class: -Ultra high output chip-on-board LED technology delivering 325 lumens of warm white light -Ultra wide beam spread will cover a large surface area with a single puck light -Dimmable LED puck light, tested and works with incandescent, magnetic low voltage and electronic dimmers, we recommend Lutron electronic dimmers -High end metal construction -Hardwired (Junction Box Sold Separately) or Plugged-In installation options -No heat output means no cabinet warping -Linkable up to 20 units Each 3 puck light kit comes with a 75″ power cord, 6 LED under cabinet puck light, removable surface mounting cup and 2 wood screws per puck for easy mounting installations.

120V Plug-in or hardwire high output puck style fixtures. No external power supply required! Each unit is self-driven with a replaceable 2.6W head (bulb). Recess or surface mounted and jumping over/around obstacles is made easy with accessory link cords. Fixtures are dimmable by standard LED wall dimmers. Full set include: 1. 2pcs 20838B 18pcs 2835 LED 120VAC 2.6W, Luminous flux:160-180lm Materials:Steel+PC CRI: > 90 Size: 72xH17mm, Finish : Satin Nickle Diffuser: milky white colour temp: 3000K IP rate: IP20 outlet cable: 0.1m 18AWG SPT-2 UL white for each side and with male and female plug 2. 1pcs 20838B-SE 18pcs 2835 LED 120VAC 2.6W, Luminous flux:160-180lm Materials:Steel+PC CRI: > 90 Size: 72xH17mm, Finish : Satin Nickle Diffuser: milky white colour temp: 3000K IP rate: IP20 outlet cable: 0.1m 18AWG SPT-2 UL white cable female plug 3. 1pcs SPT-US1800-WS-WT US standard 1.8m(6ft) 18AWG SPT-2 UL White cable with gear switch with male plug 4. 2pcs SPT-300-WT 0.3m(1ft) 18AWG SPT-2 UL White cable ,male and female plug

With robust light output and high CRI, this versatile dimmable accent lighting system can be used for task areas, display shelving, back bars, built-ins and more. The cetlus listed system links easily for plug-in or hardwire applications (with the cetlus listed slimline hardwire box and 12” or 24” linking cable, each sold separately). build your own system with bulk pucks combined with either single pucks or three puck kits.

American Lighting MVP-3-NK LED MVP 3-Puck Light Kit with Roll Switch and 6-Foot Power Cord, Dimmable, 4.3-Watts, 2700K, Nickel. New high performing, easy to install puck lights have a swivel feature offering over 200 lumens per puck without the need for a driver! MVP puck lights are designed for versatility – choose between recess or surface mounting! Kit includes; (1) 6-foot power cord with roll switch, (2) pucks with a 6-inch lead wire and 6-inch tail wire, (1) puck with a 6-inch lead wire and mounting screws. Warm white LEDs (2700K) with 90CRI mimic incandescent, using only 4-watts each versus 20! Each puck delivers over 200 lumens – over twice as bright as Xenon or Halogen puck lights. Pucks are dimmable with most CFL/LED and low voltage electronic dimmers (10-100% light control). Construction: Zinc alloy light housing with aluminum heat sink. Spring steel clips secure housing into surface collar with a snap-fit, and retain recessed pucks securely in place. Polycarbonate lens diffuses light. Link up to 20-pucks to a single power supple. Adaptable design allows daisy chain installation with or without linking cables between pucks. Hardwire box can be ordered a la carte, offering two 5A connection ports for larger installations. Plug-in installations can be controlled by inline roll switch on power cord; hardwire boxes are controlled by wall switch or dimmer. Founded in 1989, American Lighting, Inc. manufactures a wide range of lighting solutions for your residential, commercial and specialty lighting needs. We pride ourselves in being a lighting solutions provider by offering our customers a broad line of innovative and high quality lighting products. Continued innovation is a core strategic initiative at American Lighting, and we are committed to developing new products by utilizing the latest lighting technologies and designs. We pledge to deliver superior customer service by employing and training a team of highly experienced lighting professionals.

American Lighting MVP-1-NK LED MVP Single Puck Light Kit, 6-Inch Lead Wire and 6-Foot Power Cord with Roll Switch, Dimmable, 120V, 4.3-Watts, 2700K Warm White, 200-Lumens, Nickel. New high performing, easy to install puck lights have a swivel feature offering over 200 lumens per puck without the need for a driver! MVP puck lights are designed for versatility – choose between recess or surface mounting! Kit includes; (1) 6-foot power cord with roll switch, (1) puck with a 6-inch lead wire and mounting screws. Warm white LEDs (2700K) with 90CRI mimic incandescent, using only 4-watts each versus 20! Each puck delivers over 200 lumens – over twice as bright as Xenon or Halogen puck lights. Pucks are dimmable with most CFL/LED and low voltage electronic dimmers (10-100% light control). Construction: Zinc alloy light housing with aluminum heat sink. Spring steel clips secure housing into surface collar with a snap-fit, and retain recessed pucks securely in place. Polycarbonate lens diffuses light. Link up to 20-pucks to a single power supple. Adaptable design allows daisy chain installation with or without linking cables between pucks. Hardwire box can be ordered a la carte, offering two 5A connection ports for larger installations. Plug-in installations can be controlled by inline roll switch on power cord; hardwire boxes are controlled by wall switch or dimmer. Founded in 1989, American Lighting, Inc. manufactures a wide range of lighting solutions for your residential, commercial and specialty lighting needs. We pride ourselves in being a lighting solutions provider by offering our customers a broad line of innovative and high quality lighting products. Continued innovation is a core strategic initiative at American Lighting, and we are committed to developing new products by utilizing the latest lighting technologies and designs. We pledge to deliver superior customer service by employing and training a team of highly experienced lighting professionals.

American Lighting MVP-1-NK-B LED MVP Puck Light with 6-Inch Lead Wire, 6-Inch Tail Wire and Mounting Screws, Dimmable, 120V, 4.3-Watts, 2700K Warm White, 200-Lumens, Nickel. American Lighting’s new high performing, easy to install puck lights have a swivel feature offering over 200 lumens per puck without the need for a driver! MVP puck lights are designed for versatility – choose between recess or surface mounting, and have light where you need it with their 30-degree swivel forward and backward! Warm white LEDs (2700K) with 90CRI mimic incandescent, using only 4-watts each versus 20! Each puck delivers over 200 lumens – over twice as bright as Xenon or Halogen puck lights. Pucks are dimmable with most CFL/LED and low voltage electronic dimmers (10-100% light control). Construction: Zinc alloy light housing with aluminum heat sink. Spring steel clips secure housing into surface collar with a snap-fit, and retain recessed pucks securely in place. Polycarbonate lens diffuses light. Link up to 20-pucks to a single power supple. Adaptable design allows daisy chain installation with or without linking cables between pucks. Hardwire box can be ordered a la carte, offering two 5A connection ports for larger installations. Plug-in installations can be controlled by inline roll switch on power cord; hardwire boxes are controlled by wall switch or dimmer. Founded in 1989, American Lighting, Inc. manufactures a wide range of lighting solutions for your residential, commercial and specialty lighting needs. We pride ourselves in being a lighting solutions provider by offering our customers a broad line of innovative and high quality lighting products. Continued innovation is a core strategic initiative at American Lighting, and we are committed to developing new products by utilizing the latest lighting technologies and designs. We pledge to deliver superior customer service by employing and training a team of highly experienced lighting professionals.

These 120V LED pucks can be recessed or surface mounted with light shining downward and they are dimmable using a Lutron Diva – DVCL-153P wall dimmer, and linkable up to 6 units. Plastic enclosure. Stays cool to the touch, making it safer than both halogen and xenon. Delivers exceptional energy efficiency and long lamp life. Available in white, black and nickel finishes.

Making life simple for our customers is always an important priority for us. With a direct 120V driverless connection, we have accomplished our goal with our new power LED pucks.