Best Cabinet Lighting Switch

*Door open light switch. Open the cabinet/closet/wardrobe door, the led light it controlls will start. Close the door, the light switch will stop.
It’s NOT a motion sensor switch.
It’s NOT compatible with any LED dimmer.
The door open sensor on-off switch is designed to work together with in-cabinet LED lighting or in-closet LED puck lights for applications where an automatic on-off sensor switch is desired.
When the door is opened, it will work automatically and your LED lights installed inside the cabinets will start.
When the door is closed, the LED light will stop.
Perfect to work with cabinet LED lights, closet led lights, drawer lights, wardobe lights, etc.

Automatic ON/OFF Sensor Switch Specifications:
Input Voltage: 12VDC-24VDC
Input Cable: 50CM cable including female DC jack (bigger one) of interface 5.5mmx2.1mm
Output Voltage: 12VDC-24VDC
Output Current: Max. current: 2.5A
Output Power Load: Maximum 30W at 12VDC / Maximum 60W at 24VDC
Output Cables: 50CM cables including male DC jack (smaller one) of interface 5.5mm x 2.1mm
Sensor Range: 5~7CM
Dimensions: 45mm x 16mm x 6mm

How Does This Door Sensor On-Off Switch Work:
When there is any non-transparent object (normally it’s the door of your cabinet/wardrobe/drawer/closet) is 0~6CM in front of the sensor head area, the switch will be off.
When there is no object in front of the sensor head area, with a distance over 7CM, (normally, that means the door is opened), the switch will be on and your LED light will start.

Important Installation Notice:
This door open sensor switch should be mounted behind the door of cabinet / wardrobe /closet. And the suggested distance between the door to the sensor switch head is around 1~3CM.

Descripiton:
IR Sensor Switch: It can control DC12V/DC24V input voltage LED lighting products, such as LED cabinet lights, LED rigid bar, LED strip lights. The sensitivity is 3cm-25cm.

Specification
Input Voltage:DC12V/DC24V
Input current:3A
Input power: 36W at DC12V input
72W at DC 24V input
Dimension:30.8*8.7*38MM
Cable Length:input cable 140mm
output cable 200mm
Sensor Type:IR Sensor
Sensor Distance: 3cm-25cm

Instruction:

Size:1.3″x0.9″x0.4″(33mmx23mmx10mm)   
Max. Load: 1A 250VAC
Type: Without Push, it’s NC////Push, it’s NO. This mean open the door, the switch is Closed(Light On), close the door, the switch will be open(Light Off).

Note that: the cable hole diameter is 0.01″(2.5mm), you can strip the cable,copper wire without the plastic coating, it’s easy to pull in

Packing:
2x Switch 4x Screws 4x Plalstic Caps

If you are looking for new ideas in your interior lighting, Phonar under cabinet LED lights will be a perfect choice for you! Make them your closet lights, under cabinet lights, kitchen lighting, workshop lights, garage lights, liquor cabinet lights – you name it!

PERFECT DESIGN

We are using hardened and anodized aluminum alloy for our light fixture. PMMA (acryl) matte diffusor provides smooth lighting effect with very low luminous losses. For your convenience on the right side of the light strip there is a silk-printed on/off switch symbol: you only have to barely touch it to make it work.

TOUCH SENSOR

The built-in touch sensor is a pleasant addition to this under counter light. You can switch the light on or off with just a tap.

SUPER BRIGHT HIGH EFFICIENCY LEDS

We are using lots of 2835 SMD LEDs that make the lighting surface smooth and even. LED technology provides incredibly long service, stable work and healthy lighting to these under counter LED lights. Our LEDs have Color Rendering Index 80 that makes the colors of any illuminated object more natural.

POWER ADAPTER

This LED strip light goes with a 4.9 ft long power cord that has a 3.5DC*1.35mm barrel jack fitting and a standard electric plug. Outlets generally don’t fail, they don’t need replacing, or charging, and you certainly don’t have to worry about if you got the battery that’s going to explode.

Specifications

Volt In.: AC 100-240V

Volt Out.: DC 12V, 1A

Power consumption: 6W (12”)/9W (24”)/12W (36”)/15W (48”)

Dimensions: 12*0.96*0.4 in (12”)/24*0.96*0.4 in (24”)/36*0.96*0.4 in (36”)/48*0.96*0.4 in (48’’)

Color Temperature: 3000K/4000K

CRI: 80

LED: SMD 2835 0.2W LEDs 60pcs (12”)/120pcs (24”)/192pcs (36′)/252pcs (48”)

Luminous flux: 500Lm (12”)/750Lm (24”)/1000Lm (36”)/1200Lm (48”)

Beam angle: 120°

This is a set of bright LED under cabinet rigid light bar kit with dimmable switch, widely use as above cabinet lightng,shelf lighting,counter top lighting, task lighting etc.

@ SPEC:
Color Option: Warm white(2700K).
Energy Saving: 3W, equal to 30W halogen, incandescent or fluorescent kitchen light.
Lumen : 300 lumen per panel bar
CRI: >80
Size: Length:11 inch, Width:1 inch,Thickness:0.32inch
Inter connect cable: 5.9 inch / 20 inch, Power Adapter: 80 inch, Power Adapter Connector: 12 inch
Material: Aluminum alloy

@ FEATURES:
SAFE TO USE: UL listed power plug, 12Vdc output.
EASY TO INSTALL: You can either use 3M adhesive tapes or screws to install in wherever it fits.
ENERGY SAVING: 3W LED is to replace 30W halogen led under cabinet lights, >90% electricity bill saving.
LOW PROFILE KITCHEN LIGHT BAR: Only 0.32 inch of thickness, it is almost invisible after installing the slim under or above cabinet lights.
DIMMABLE: By using a dial dimmer switch, the under cabinet rigid bar lights can be used for dimming from 0% to 100%. Plus there is another On/Off switch inline with the transformer, dimming function can be remembered, you can have the same brightness next time when the cabinet light bar turned on
FLEXIBLE TO CONNECT: There are 2 different connection cables included, one is 5.9 inch, the other is 20 inch. Therefore the under cabinet lights can be connected according to different distance.

@ PACKAGE INCLUDED:
6 x LED under cabinet rigid bar light
1 x power wall plug
1 x dial dimmer switch
1 x DC connector
5 x connection cable (5.9 inch)
4 x connection cable (20 inch)
12 x double sided adhesive stickers
12 x screw mounting buckle
12 x screw
8 x cable arrangement buckle

@ REMOTE CONTROL:
Need a RF remote control, please refer to the ASIN #B01M7TGZ9B, extension cables please refer to ASIN B07J5XP2D3.