Best Gunstock Bedding Epoxy
Nowadays, there are so many products of gunstock bedding epoxy in the market and you are wondering to choose a best one.You have searched for gunstock bedding epoxy in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings gunstock bedding epoxy which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Raven Eye Custom Bedding Pillar Pack, 1/2" and 7/16" diameters
The inside diameter of the pillar (hole) is = 0.260″, which can accommodate up to a #14 bolt (1/4″) or a M7 metric bolt freely. The outside diameter is irregular to increase adhesion. The 1/2 pillar has a maximum diameter at 0.480″, so it can fit freely in a 1/2″ (0.500″) diameter hole, or tightly in the same hole with bedding epoxy applied. The 7/16 pillar has a maximum diameter of 0.430″ so it can fit freely in a 7/16″ (0.4375″) diameter hole, or tightly in the same hole with bedding epoxy applied. All our pillars are CNC machined from aluminum for the highest precision. The pillar must be cut to length (with the exception of the specific Ruger 10/22 pillar), and are long enough for all installations. In many cases, this will result in enough material for more than one installed pillar. The roughened finish on the outside of the pillar increases the surface area the bedding epoxy can bond to, providing a more secure installation. Correctly pillar bedding a rifle will improve its accuracy.
Wheeler Bedrock Bedding Kit 190274
- Ideal for wood, laminated, and synthetic stocks, the Miles Gilbert Bedrock Kit contains all the necessary components and instructions necessary to achieve the perfect fit for your action
- 4 oz. bedrock (2oz resin and 2 oz. hardener)
- Illustrated instructions
- Improve rifle accuracy
- Brown or black dyes for wood or synthetic gunstocks
A rifle’s accuracy is dependent on the fit of its barreled action to its stock. Bedrock makes your rifle’s stock and metal components fit together to eliminate shift and pressure points caused by recoil and changes in temperature and humidity. Removing the contact points of the stock where the barreled action meets, and replacing them with Bedrock assures you of a perfect, stress-free fit. The stock and barreled action becomes a unit, not just two components fitting arbitrarily together. Kit can generate approx 1.5 cups volume of bedding material.
With a 24-hour cure, you’re only a day away from a perfect fit and a more accurate rifle. For use with wood or synthetic stocks, 30 minute working time, 24-Hour Full Cure.
Kit Includes:
– 4 oz. Bedrock (2 oz. resin, 2 oz. hardener)
– Brown & Black dye for wood or synthetic gunstocks
– 2 fl. oz. Microballoons
– 3 Mixing Cups
– 3 Mixing/Applicator Sticks
– Release Agent
– 2 Release Agent Applicators
– Modeling Clay
– Surgical Tubing
– Illustrated Instruction Booklet
Miles Gilbert Wheeler Engineering Bedrock Glass Bedding KitPl
- Used by Finest Professionals , Gun Smith , and Stock Builders
- Store indoors in a cool, dry place at an ambient temperature. Store locked up. Keep containers closed when not in use. Store away from incompatible materials. Keep out of reach of children.
Ideal for wood, laminated, and synthetic stocks, the Bedrock Kit contains all the necessary components to achieve the perfect fit: 2 oz. each of Resin and Hardener, Release Agent with two applicators, Measuring Spoons and Mixing Cups, brown and black dyes, Microballoons for customizing the viscosity, modeling clay, surgical tubing, and the most comprehensive, illustrated instructions ever offered to take you from start to finish with your bedding project.
Brownell Acraglas Gel [Misc.]
- 7/16"
- Made for use with the Ruger 10/22, but also compatible with many other stocks
- 7/16 is a common diameter for pillars, overall length of 0.800"
- Made from bar stock aluminum, natural finish
- For use with stock accurizing, a must for benchrest, and the only way to go SUB MOA
ACRAGLAS GEL 4 oz. Kit
Raven Eye Custom Bedding Pillar, 7/16" Diameter
The inside diameter of the pillar (hole) is = 0.260″, which can accommodate up to a #14 bolt (1/4″) or a M7 metric bolt freely. The outside diameter is irregular to increase adhesion, with the maximum diameter at 0.430″, so it can fit freely in a 7/16″ diameter (0.4375″) hole, or tightly in the same hole with bedding epoxy applied. All our pillars are CNC machined from aluminum for the highest precision. The pillar must be cut to length (with the exception of the specific Ruger 10/22 pillar), and are long enough for all installations. In many cases, this will result in enough material for more than one installed pillar. The roughened finish on the outside of the pillar increases the surface area the bedding epoxy can bond to, providing a more secure installation. Correctly pillar bedding a rifle will improve its accuracy.
Devcon 52345 Plastic Steel Epoxy – 1 oz. 2-Part Tube
Devcon Plastic Steel Epoxy is a two-part, high strength, cold-welding epoxy for use on all types of metal repairs. Non-flammable and water-resistant, this epoxy contains a steel alloy that will not rust. Fills holes and repairs cracks in broken furniture, tools, appliances, toys, cars and more. Dries to a dark gray color, and once fully cured, it can be drilled, threaded, machined or filled. Bonds all metals including steel, stainless steel, aluminum, brass, iron, pewter, and copper with a tensile strength of 2500 PSI. Only mix the amount of hardener and resin together that can be used within the handling time, and always mix equal portions of the hardener and resin thoroughly together in order for this product to cure properly. Epoxies are generally not recommended for long term exposure to chemicals and solvents. Temperature Range: 200°F constant; 250°F intermittent.
Brown Glassbed Kit
- Designed for bedding down deck hardware, molding cleats, padeyes, flanges, transoms, cabin trunks, keels, etc.
- Its surface hardens to make it receptive to paint, but remains soft and pliable underneath to provide waterproofing and flexibility
- Prevents leaking and rotting between double planking joints
- Color: Natural
- Size: 1 Quart
Brownells 081050101 Glasbed Kit Glasbed Kit 9 Piece
Interlux Y214QT Boatyard Bedding Compound (Natural, Quart)
Boatyard Bedding Compound is designed for bedding down deck hardware, molding cleats, padeyes, flanges, transoms, cabin trunks, keels, etc. Its surface hardens to make it receptive to paint, but remains soft and pliable underneath to provide waterproofing and flexibility. It prevents leaking and rotting between double planking joints.
Acraglas Rifle Barrel Bedding
- This life saver is referred in the Tokyo Marui VSR-10 manual as the "Spacer Collar"
- It is a critical part placed between the trigger guard and the receiver of a VSR-10 sniper rifle
- Compatibility: For Tokyo Marui and other compatible VSR-10 Airsoft Sniper Rifles
- Processing: CNC Machine Processing
- Material: High Grade Aluminum
Brownells 10100 Acraglas 2 Gun Accurizing Bedding Kit Acraglas 2 Gun Kit
Evike – Angel Custom CNC Aluminum Space Collar Bedding Pillar for VSR-10 BAR10 G-SPEC Airsoft Sniper Rifles
- Material:Polyester fiber
- Twin(3pcs): 1*Duvet Cover63"x82"(160x210cm),1*Flat Sheet70"x94"(180x240cm),1* pillowcases18"x29"(48x74cm)
- The fabric is soft and breathable,Bright color and exquisite pattern, give your home to add another kind of fun.
- Environmental printing and dyeing, vivid patterns, do not fade
- Attention:Twin Only one pillowcase,This bedding set does not include any comforter or filling, you can put your own comforter,duvet or blanket into the cover
Highly recommended replacement part for your stock plastic bedding pillar!
Compatibility: For Tokyo Marui and other compatible VSR-10 Airsoft Sniper Rifles
Material: High Grade Aluminum
Processing: CNC Machine Processing
Color: Angel Custom Red
Manufacturer: Angel Custom
Judy Dre am Boys Polyester Bedding Sets 3pcs Home Textiles Tanks/Aircraft Pattern Duvet Cover Set 3-Piece Battleship/Machine Gun Print Bed Set for Men Twin Size
- 5/8" OD for bedding of heavier calibers
- Made from bar stock aluminum, natural finish
- Cut to length, overall length of 1.200"
- Roughened surface to allow for bedding epoxy adhesion
- For use with stock accurizing, a must for benchrest, and the only way to go SUB MOA
Bedding before initial use, application rinse, soak time of about 5 minutes, without any detergent, the surface,The pulp quality and floating color wash, can protect bedding does not fade, color glamorous. (Add a little salt can be solid color oh)
Using environmental protection printing and dyeing technology, gives you a safe and healthy sleep environment
Soft, can not ball, lint-free
This bedding set does not include any comforter or filling, you can put your own comforter,duvet or blanket into the cover
Raven Eye Custom Bedding Pillar, 5/8" Diameter
The inside diameter of the pillar (hole) is = 0.260″, which can accommodate up to a #14 bolt (1/4″) or a M7 metric bolt freely. The outside diameter is irregular to increase adhesion, with the maximum diameter at 0.605″, so it can fit freely in a 5/8″ diameter (0.625″) hole, or tightly in the same hole with bedding epoxy applied. All our pillars are CNC machined from aluminum for the highest precision. The pillar must be cut to length (with the exception of the specific Ruger 10/22 pillar), and are long enough for all installations. In many cases, this will result in enough material for more than one installed pillar. The roughened finish on the outside of the pillar increases the surface area the bedding epoxy can bond to, providing a more secure installation. Correctly pillar bedding a rifle will improve its accuracy.