chitahome 
Nowadays, there are so many products of home audio crossover in the market and you are wondering to choose a best one.You have searched for home audio crossover in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings home audio crossover which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Acoustic Audio WS1005 Passive Subwoofer Amp 200 Watt Amplifier for Home Theater
Amazon.com
- Splits stereo signals into 3 stereo bands (LOW / MID / HIGH) and a 4th mono band for the subwoofer. For use with 3-way speakers in combination with a subwoofer, the CX-23SW connects directly to the 3 speaker amplifiers and subwoofer via XLR connectors
- Phase inversion switches on the MID and HIGH bands allows driver phase adjustment, and low-cut subsonic filters provide low frequency driver protection
Acoustic Audio by Goldwood amp for an in wall subwoofer includes LFE and RCA inputs, gain and crossover controls, and raw wire speaker outputs. This WS1005 works with almost all home audio receivers with subwoofer outputs and will deliver plenty of bang for the buck!
Nady CX-23SW 3-Way Stereo, Plus Subwoofer Crossover – Fits in a 19" Single Rack Space (1U) – For multi-amplifier setup
Amazon.com
- Rockville PPA20 Professional 1U Rack Mount Pre-Amplifier with EQ and Crossover
- Rockville PPA20 Rack Mount Pre-Amplifier. 1U Rack Size. 1/4" microphone input. RCA PHONO / AUX1 / AUX2 / AUX3 / AUX4 / AUX5 inputs. 1/4" headphone output. RCA REC / LINE outputs. XLR master output ( left, right ). Headphone volume & Microphone volume controls. 3 band EQ (Treble / Mid / Bass).
- Master volume. L / R balance. Input source switch. Mono / Stereo switch. Mute. Low cut crossover control allows you to cut off certain frequencies which comes in handy when using turntables, subs, and other gear. This function will allow you to play your music louder, with lower distortion and make your speakers last longer.
Rockville PPA20 Home Audio Preamp Pre-Amplifier w/Crossover+EQ
Amazon.com
- Ten Bands of graphic EQ per Channel
- Multi-colored spectrum analyzer display shows the output of the system
- LEDs in all sliders, Two Line inputs and dual tape monitor loops
- Tuner | CD | TAPE | DVD inputs!
- Power supply MAX:20W
- NOTE: Refer the User Manual before use which is highly essential.
EMB – Eqb75 – Dual 10 Band Stereo Equalizer With Spectrum Analyzer
Amazon.com
- ❤ 【Hi-Fi Amp with Clean Sound Quality】M02 subwoofer amp adopt with the Instruments TPA3116 chip,NE5532 op-amp, can provide 100watt output power for 4 ohm subwoofer or speaker. No pop, no audible noise, dead silent when nothing is playing through it.
- ❤ 【Full-Frequency and Sub Bass Switchable 】With a selector can be switched to subwoofer bass amplifier or full frequency mono amp, can be connected to passive suboower, passive speaker or active subwoofer.
Dual 10 Band Stereo Equalizer with Spectrum Analyzer Display! All led sliders!
Fosi Audio Subwoofer Amplifier Mono Channel Amp Home Theater Power Amplifier 100W M02
Amazon.com
- Come with the 24V power adapter that can be carefully matched with this integrated amp physically as well as electrically. Unlike other amps come with a 12V power supply, The power supply is very important for a digital amp if you need clear sound !
- With subwoofer volume control, L and R channels Treble&Bass independent control, subwoofer frequency adjustment control.
- Adopt Texas Instruments TPA3116D2 * 2 chips, small simple compact design but practical and powerful, can drive 2-8ohm, 20-200Watts speakers
TB20A TPA3116D2 Stereo Amplifier 2.1 Channel Class D Audio Amp with Subwoofer Volume Control 2x50W 1x100W Sub Output Super Bass Power Receiver, Treble Bass Independent Adjustment + Power Supply
Amazon.com
- G2 can be used as a sub amp or a mono channel amp. It has a mode switcher which can change between SUB and PBLT modes conveniently. Equipped with 19V 4.74A high quality power supply.
- Applications: ① G2 can be used as a subwoofer power amplifier for passive subwoofers
- ② G2 can be used as a mono amp to drive single channel. You can use two G2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. Compared with normal 2.0CH amps, it can ensure totally no interference between two channels and can provide higher power.
Nobsound G2 Subwoofer Amplifier & Mono Power Amp, PBTL/BTL Bridge, 100W Mini Sub Amp for Home Theater
Amazon.com
- TOP OF THE LINE TWEETERS - Professional grade super tweeters that can handle high frequencies with ease. DS18 meticulously designed these tweeters to sound as good as they look.
- POWER YOU CAN COUNT ON - PRO-TW120B ferrite tweeter delivers out-of-this-world power, at 200 watts RMS and 300 watts Max at 4 ohms with build in capacitor filter.
- HIGH-QUALITY ALUMINUM FRAME AND DIAPHRAGM - If you like your highs crisp, bright, and loud, aluminum tweeters are exactly what you need. It's light, strong, and produces a bright sound at high frequencies.
DS18 PRO-TW120B Super Tweeter in Black – 1", Aluminum Frame and Diaphragm, 300W Max, 200W RMS, 4 Ohms, Built In Crossover – PRO Tweeters Are the Best in the Pro Audio and Voceteo Market (Pair)
2 PACK 3 way Crossover CRX-303 300 Watts Passive Crossover Car Audio Tweeter
2- Audiopipe CRX-303 300W Crossovers Two Brand new Audiopipe CRX-303 300 Watt Crossovers. These are a very high quality passive crossover network. This gives you the ability to have a woofer a mid speaker and a tweeter running off of one speaker wire input, it also powers each of those speakers at the proper frequency for optimum sound quality! This makes setting up or improving your car audio system way easier and quicker! This is a must have for car audio installations! You will recieve 2 CRX-303 Crossover’s Specifications:Two Audiopipe 4 ohm CrossoversWoofer Frequency: 20Hz-5.6KHzMidrange Frequency: 700Hz-4KHzTweeter Frequency: 5KHz-20KHz12DB Per Octave Slope (4 OHMS)Enclosed ABS CabinetGold Plated Screw Terminals150 Watts RMS / 300 Watts PeakHigh Grade Polymer CapacitorsFerrite and Air Cooled Spools
Technical Pro XO3 3 Way Crossover with Subwoofer Output, 20Hz-25kHz 1dB Frequency Response, Black
Amazon.com
- Stereo half-frequency, single-channel third-frequency electronic crossover. Trs or XLR balanced input and output Differential. Choice of stereo or the sum of left and right channels while the synthesis of ultra-low sound. Two channels are selected Xiao range switch. Two channels have 40Hz high pass filter (frequency cut End). all outputs with phase reverse switch
- Technical parameters: TRS or XLR balanced input and output Differential/ choice of stereo or the sum of the synthesis of left and right channel subwoofer
Crossover: Sub: 50-250Hz; Lo/Mid 70-1000Hz; Mid/Hi 480-7000Hz Frequency Response: 20Hz-25kHz 1dB Low Cut Filters: 30Hz / -3dB, 12dB/Octave Inputs: 1/4" (6.35mm) Outputs: Balanced XLR, 1/4" (6.35mm) Total Harmonic Distortion: <0.05% Signal to noise ratio: >95dB Impedance: Input – 100 Kohms, Output – 220 ohms Dimensions: 19"w x 1.75"h x 5.75"d (483 x 45 x 146mm) Weight: 5.5 lbs (2.5 kg) 110-220V Switchable
EMB Professional Sound System EBX89 Digital Crossover for Home/DJ Performance/Club/Studio/Stage/Show/Entertainment
Amazon.com
- Rockville RX230 2-way Stereo / 3-way Mono rack mountable crossover. Ability to mix 2 channels output. 24dB/Octave filters. Mute switches.
- Channel Gain Control: 0 to +12 dB. Low Frequency Level Control: -∞ to +6 dB. High Frequency Level Control: -∞ to +6 dB.
- Low Frequency to High Frequency crossover: 100Hz to 1 Khz x10 range: Changes. Low Frequency to Mid Frequency from (100 Hz to 1 kHz) to (1kHz to 10 kHz).
Stereo half-frequency, single-channel third-frequency electronic crossover. Trs or XLR balanced input and output Differential. Choice of stereo or the sum of left and right channels while the synthesis of ultra-low sound. Two channels are selected Xiao range switch. Two channels have 40Hz high pass filter (frequency cut End). all outputs with phase reverse switch.
technical parameters:
trs or XLR balanced input and output Differential/ choice of stereo or the sum of the synthesis of left and right channel subwoofer
the scope of the two-channel selection switches are x 10 two channels have 40Hz high pass filter (frequency cut end)
therefore, the output spectrum can be independently adjusted average dB/ oct linkwttz-riley filters (the professional standard). stereo/ mono status indication Leo lights, indicate the selected mode of operation.
24db/oct linkwitz-riiey filters (the professional standard) stereo/ mono status indication Leo lights, indicate the selected mode of operation.
Rockville RX230 2 Stereo / 3 Way Mono Crossover with XLR Input and Output
Features:
Rockville RX230 2-way Stereo / 3-way Mono rack mountable crossover
Ability to mix 2 channels output
24dB/Octave filters
Mute switches
Channel Gain Control: 0 to +12 dB
Low Frequency Level Control: -∞ to +6 dB
High Frequency Level Control: -∞ to +6 dB
Low Frequency to High Frequency crossover: 100Hz to 1 Khz x10 range: Changes
Low Frequency to Mid Frequency from (100 Hz to 1 kHz) to (1kHz to 10 kHz)
Switchable 2-way stereo or 3-way mono operation
Subwoofer out
Subwoofer X-Over Freq ( 30Hz – 200Hz ) adjustable
Subwoofer Gain -6 to +6 dB
Specifications:
Each output is -3 dB at the selected crossover frequency value. Outputs are
essentially flat within their relative passbands.
Distortion: Less than 0.02% THD @ +4 dBu,@ 1 kHz
Hum and Noise: Crossover controls set @ 1 kHz, all level controls set at 0 dB;
22 Hz to 22 kHz, unweighted gain @ 0dB(ref +4dBu) – 90dB
Low Frequency Output: -86 dBu below 80 dB
High Frequency Output: -84 dBu below -78 dB
Maximum Input Level: +14 dBu, (channel gain @ 0 dB input level controls set at 0
dB) +22 dBu
Maximum Output Level: +22 dBu, unbalanced +28 dBu, balanced
Input Impedance: 10k ohms unbalanced
Dimensions: 19 x 4.85 x 1.8 inches
Gross weight: 4.18 Lbs
Connectors:
Inputs: XLR Balanced
Outputs: XLR Balanced
Power Requirements: 120V AC, 50/60 Hz, 20 watts
110-120V voltage
