Best Home Audio Rtl-Sdr

Includes 1x RTL-SDR Blog Wideband LNA (Bias Tee Powered) and 1x SMA male to SMA male adapter. This is a general purpose SPF5189Z based wideband LNA. Works from 50 MHz to 4 GHz with a noise figure of less than 1dB and a gain of 18.7dB @ 900 MHz. Requires bias tee power, but there is an internal header which can be used to switch to external power, although you won’t be able to use the enclosure in that case. If you’re looking to improve ADS-B performance we recommend our Triple Filtered ADS-B LNA.

Please note again: Requires 3 – 5v bias tee power. The RTL-SDR V3 provides 4.5v so is suitable.

IMPORTANT ESD NOTE: If you use this LNA placed close to an outdoor antenna, please ensure that your antenna is sufficiently grounded. There is a fast ESD diode, and GDT on the LNA PCB for dual protection, but if the antenna is not grounded the effectiveness of ESD protection components will be severely reduced, and you run the risk of damaging the LNA.

Description:

High quality

High Robustness

Features
As showed in the followed Video

http://v.youku.com/v_show/id_XNjEwODYzNzM2.html

http://v.youku.com/v_show/id_XNjI2OTc5MDQw.html

Data download:

http://rtlsdr.org/softwarewindows

http://v.youku.com/v_show/id_XNjgwODY3OTYw.html

http://www.radioamatoripeligni.it/i6ibe/rtl2832hf/dongle.htm
http://www.qsl.net/py4zbz/hfrtl.htm

Packagede included:

100KHz-1.7GHz full band UV HF RTL-SDR USB Tuner Receiver

Generally our computer does not recognize the device,we need the third party software to install.

Wideband amplifier feed circuit, the high frequency is affected by the parasitic capacitance parameters, and the performance drops sharply, so the feed needs to use bias tee. Some broadband amplifiers do not have a DC blocking capacitor inside, and the output needs to be powered. A bias tee is required.
Bias Tee consists of ultra-wideband, near idealized, high frequency inductors and capacitors without resonance points.

Features:

High quality, sturdy and durable.
It consists of high frequency inductors and capacitors with ultra-wideband, near idealized and no resonance points.
Isolated Capacitor: Isolate DC to prevent DC voltage from leaking to subsequent circuits or test instruments.
High frequency inductance: Isolation of AC information to prevent high frequency signals from leaking into the power system.
Applications: Broadband amplifiers, fiber optic communications, optical modulation drivers, and other test and measurement applications.

Specification:

Material: PCB
Working Freq: 25k-100MHz
Insertion-loss: <;1dB
Operating Voltage: DC1-50V
Maximum working current: <;0.6A
Size: approx. 5.9 * 2.3 * 0.3cm / 2.32 * 0.91 * 0.12in
Weight: 6.6g

Package list:

1 * Bias Tee

Description:

Item type:Tuner Receiver

Scan for cordless phones and baby monitors.

The monitoring and reception of meteorological agencies have launched data on the meteorological area.

Monitor your self-launched altitude balloon for payload recovery.

Receiving wireless temperature sensors and wireless power sensors.

Listening to the VHF amateur radio.

Hamming APRS packages for decoding.

Watch the analog TV broadcast.

Sniffing GSM signals.

Using rtl-sdr on your Android device as a portable radio scanner.

Receiving GPS signals and decoding.

Using rtl-sdr as a spectrum analyzer.

Reception of NOAA weather satellite images.

Listen to the satellites and the ISS.

Listening to unencrypted military communications.

Radio astronomy.

Monitoring meteor show.

Listen to the FM radio and decode the RDS information.

Listening to the DAB radio broadcast.

Use rtl-sdr as a power supply for traditional hardware radio.

Decoding of taxi data terminal signals.

Use rtl-sdr as a true random number generator.

Listening to amateur radio amateurs in SSB with LSB / USB modulation.

Digital communications decoding of digital amateur ham like CW / PSK / RTTY / SSTV.

HF weatherfax reception.

Short-range digital radio reception (DRM) monodial digital radio radio.

Listen to international short-range radio.

Search for RADAR signals such as radar on the horizon (OTH) and HAARP signals.

Material: plastic and metal

Black colour

Product size: 93 * 50 * 20mm

Package Include:

1 x 100KHz-1.7GHz Full Band RTL-SDR Radio Speaker Radio Tuner Reception Receiver / Radio R820T + 8232

1 x USB cable

1 x antenna

Note:

The colors deviation might differ due to different monitor settings.

Includes 1x Active L-Band Patch Antenna (Covering 1525 – 1637 MHz) in Weather Proof Enclosure, 1x 2 meter RG174 extension cable, 1x Flexible Tripod Mount, 1x Suction Cup Mount. This is an active (amplified + filtered) high performance patch antenna designed for receiving L-Band satellites such as Inmarsat, Iridium and GPS. Easily mountable outside on a window, surface, stick, tree branch etc. Comes with easy to use mounting solutions and extension coax, and is enclosed in a fully weather proof plastic cover. Requires 3.3 – 5v bias tee power. The RTL-SDR Blog V3 provides 4.5v so is suitable.

Includes 1x Heavy Duty Conductive Magnetic Whip Base with 2M RG59, 1x 9.5cm fixed metal whip (usable from 400 MHz to 2 GHz+), 1x 17cm to 1m telescopic whip (usable from 100 MHz – 400 MHz). Uses a conductive metal base (with conductive ground plane foil) for better coupling to the ground plane. This ensures better performance. Great for use with KerberosSDR and direction finding.

Specifications:
Gain: 5dBi;
Frequency Range: Dual Band 978MHz 1090MHz;
Compatible with: RTL SDR Software Defined Radio SDR ADS-B Receiver USB Stick Dongle Tuner;
VSWR: < 2.0;="">
Impedance: 50 ohm;
Direction: Omni-directional;
Antenna Connector: SMA Male Connector;
Accessoried Connector Adapter: MCX Plug to SMA Female Connector Adapter;
Feature: Magnetic Base Mounting;
Net Weight: 68g;
Operating Temperature: -20°С ~ +80°С
Storage Temperature: -30°С ~ +85°С
Package List: 1 x Antenna, 1 x Connector Adapter (As the Picture Shown);

Specifications:
Compatible with: Antenna Extension Cable for 4G LTE Mobile Cell Phone Signal Booster Repeater Software Defined Radio RTL SDR ADS-B Receiver Amateur Ham Radio Transmitter
Connector: SMA Male 50 Ohm Connector
Connector: SMA Female 50 Ohm Connector
Cable: RG316 50 Ohm Coaxial Cable
Length: 3.3 feet / 1m
Impendence: 50 Ohm
Package List: 2 x Cable (As the Picture Shown)

These high-quality aluminum enclosures (or aluminium, if you’re weird like that) are custom-made for all current production versions of the Ham It Up upconverter. A better option than unshielded cases, most certainly, and fairly priced as well.

The enclosures include the appropriate standoffs and screws to mount the upconverter. The color-matched side panels are included as well. Two color options are available – metallic blue with laser-etched labeling, and silver with color silkscreen labeling.

NOTE:ONLY compatible with Ham It Up v1.3 and higher. Enclosures for v1.2 and earlier are still available in our webstore for a limited time.

The NooElec SMA cable connectivity kit is a great companion for any software defined radio with female SMA input, like our NESDR SMArt series or HackRF. Perfect for use as a field kit and for portable applications! It also makes a nice home on any test bench or in any radio shack.

Made with quality, low-loss RG-58, which means FAR less attenuation than cables made from thin RG-316 or RG-174. Heatshrink is applied to each cable end as strain relief.

As usual, a full 2-year warranty is included through NooElec.

Included:
✔ Male SMA to female N-connector cable
✔ Male SMA to female F-connector cable
✔ Male SMA to SO-239 cable
✔ Male SMA to female BNC cable
✔ Male SMA to female MCX cable
✔ Male SMA to female PAL cable
✔ Male SMA to female RP-SMA cable
✔ Male SMA to male SMA cable

Connector notes:
• F-connector is also known as ‘coax’ or ‘TV connector’ in North America
• PAL-connector is also known as ‘TV connector’ in Europe. Other names include ‘Belling-Lee’ and ‘IEC 61169-2’
• SO-239 is also known as ‘UHF’. The male mating side of ‘UHF’ is ‘PL-259’
• RP-SMA differs from SMA! If your device has a connector that looks like female SMA (outer threads), check the center pin. If there is no center pin, it is SMA. If there is a center pin, it is RP-SMA. It can be confusing, so if you have questions please contact our support team for assistance.

The NooElec SMA adapter connectivity bundle is a great companion for any software defined radio with female SMA input, like the NESDR SMArt series or HackRF. Perfect for use as a field kit and portable applications! It also makes a nice home on any test bench or in any radio shack.

Included:
✔ Male SMA to female N-connector adapter
✔ Male SMA to female F-connector adapter
✔ Male SMA to SO-239 adapter
✔ Male SMA to female BNC adapter
✔ Male SMA to female MCX adapter
✔ Male SMA to female PAL adapter
✔ Male SMA to female RP-SMA adapter
✔ Male SMA to male SMA adapter (barrel connector)
✔ Portable carrying case with 8 compartments

Connector notes:
• F-connector is also known as ‘coax’ or ‘TV connector’ in North America
• PAL-connector is also known as ‘TV connector’ in Europe. Other names include ‘Belling-Lee’ and ‘IEC 61169-2’
• SO-239 is also known as ‘UHF’. The male mating side of ‘UHF’ is ‘PL-259’
• RP-SMA differs from SMA! If your device has a connector that looks like female SMA (outer threads), check the center pin. If there is no center pin, it is SMA. If there is a center pin, it is RP-SMA. It can be confusing, so if you have questions please contact our support team for assistance.