Best Monoprice Home Audio System
Nowadays, there are so many products of monoprice home audio system in the market and you are wondering to choose a best one.You have searched for monoprice home audio system in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings monoprice home audio system which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Monoprice 131028 6 Zone Home Audio Multizone – 12 Channel Amplifier with Rs232 and 70V and 4-Ohm Output
- Immersive sound: The immersive, upward-firing Driver adds a new dimension to movie soundtracks, making the sound come alive from all directions and creating a 3D space. The upward-firing Driver Projects sound towards the ceiling, with the ceiling reflecting the sound back down into the listening space. With this system there is no need to install in-ceiling speakers for height channels! This driver arrangement and connectivity is fully compatible with Dolby atmos@enabled receivers and soundtracks
This 6-Zone home audio multizone 12-channel amplifier is a 12-channel audio distribution amp that can be configured for six stereo 4-8 ohm zones, six stereo 70/100V constant voltage zones, or three high powered 8-ohm bridged zones. It supports any combination of stereo, bridged, and constant voltage zones. It delivers 30 watts per channel into 8 ohms, 50 watts per channel into 4 ohms, or 100 watts into 8 ohms in bridged Mode. Each zone can be controlled using the included IR remote control or RS-232 computer control. The RS-232 section is bidirectional, with an easy to configure command structure. It can be configured to automatically send Zone status updates or respond to queries to confirm Zone status and settings.
Monoprice 133831 Premium 5.1.2-Ch. Immersive Home Theater System – Black with 8 Inch 200 Watt Subwoofer
- Class-D amplifier providing 50 watts/channel (RMS) into 8 ohm loads or 65 watts/channel into 4-ohm loads | Bridgeable output provides 120 watts into a single 8-ohm load
- 4-pole detachable speaker screw connector (Phoenix connector) with support for up to 12 AWG speaker wire | 12-volt trigger input for power-on/off | 12-volt trigger output for controlling other devices
- Buffered loop output of original signal for connecting additional amplifiers
The Monoprice premium 5.1.2-Channel immersive home theater system takes your home theater to new heights! Fully compatible with both standard and Dolby Atmos enabled receivers, The 5.1.2 system features two satellite speakers that have been equipped with immersive, upward-firing drivers, enhancing the detail in multichannel, multidimensional soundtracks. Based on the sound signature and components of the popular 10565 Home theater system, The Monoprice premium 5.1.2-Channel immersive home theater system surpasses all expectations for sound quality in a small package!.
Monoprice Unity 100-Watt Bridgeable Power Amp
- Immersive sound The immersive, upward-firing Driver adds a new dimension to movie soundtracks, making the sound come alive from all directions and creating a 3D space. The upward-firing Driver Projects sound towards the ceiling, with the ceiling reflecting the sound back down into the listening space. With this system there is no need to install in-ceiling speakers for height channels! This driver arrangement and connectivity is fully compatible with Dolby atmos@enabled receivers and soundtracks
Unity 100-Watt Bridgeable Power Amp
Multiroom audio systems are in high demand these days. Homeowners and businesses have their own idea of what they want. Sometimes the all-in-one does not meet the need of the client.
This 2-channel class D power amplifier features a stereo speaker output, with support for 4-ohm and 8-ohm speakers. It can deliver 50 watts per channel into 8-ohm loads or 65 watts per channel into 4-ohm loads. Additionally, the output can be bridged to provide 120 watts to a single 8-ohm speaker. It includes a buffered loop line output of the original signal for driving another power amplifier in distributed whole house audio systems. The amp can be configured for always on, signal detection, or triggered power on status. It also includes a 12-volt trigger output for controlling other devices.
Features:
• Class-D amplifier providing 50 watts/channel (RMS) into 8 ohm loads or 65 watts/channel into 4-ohm loads
• Bridgeable output provides 120 watts into a single 8-ohm load
• 4-pole detachable speaker screw connector (Phoenix connector) with support for up to 12 AWG speaker wire
• 12-volt trigger input for power-on/off
• 12-volt trigger output for controlling other devices
• Buffered loop output of original signal for connecting additional amplifiers
• Rear panel volume gain adjustment
• Built-in thermal and short circuit protection circuits
• Includes rack-mount ears for mounting a single amp or two amps side-by-side
Monoprice 133832 Premium 5.1.4-Ch. Immersive Home Theater System – Black with 8 Inch 200 Watt Subwoofer
- Surround yourself in high-fidelity with the Monoprice 5.1-channel Home Theater Speaker System!
- This speaker system features four satellite speakers and a center channel speaker for the mid- and high-range audio signals, plus an 8" powered subwoofer to handle the low frequencies. All the speakers come with an attractive black finish and convenient spring-loaded signal connectors.
- The center speakers use two 3" shielded mid-range cones, while the satellites employ one 3" cone and a 1/2" dome tweeter. However, don't let the small size fool you! These 8 ohm speakers will handle up to 125 watts of power from your home theater receiver at frequencies from 150 Hz to 20 kHz.
Monoprice 5.1 Channel Home Theater Satellite Speakers And Subwoofer – Black
- Convert a Digital Optical Audio signal into a Digital Coaxial Audio signal using this S/PDIF
- Convert a Digital Optical Audio signal into a Digital Coaxial Audio signal using this S/PDIF
- Convert a Digital Optical Audio signal into a Digital Coaxial Audio signal using this S/PDIF
Monoprice 113358 Multizone Source Keypad with Bluetooth Receiver
- This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.
This Digital to Analog Audio Converter converts Digital Coaxial or Digital Optical (To slink) audio signals into stereo analog audio signals for connection to an external device, such as an amplifier, using standard RCA audio cables.
Monoprice 60-Watt Powered Subwoofer – 8 Inch With Auto-On Function, For Studio And Home Theater
Monoprice 12 Inch 150 Watt Powered Subwoofer, Black (109723)
- DuPont Kevlar fiber cone drivers delivery clean bass reproduction, This lightweight transducer is a natural sound with significantly less distortion than conventional drivers.
- Immerse yourself in airy detailed clarity with defined vocals and dialog from the pivoting titanium Silk dome tweeters of these installed speakers.
- Enjoy caliber speakers as main home theater speakers and whole home house systems or add as Surrounds and immersive sound sources.
Monoprice 3-Way Fiber In-Wall Speakers – 8 Inch (Pair) With Removable And Paintable Grille – Caliber Series
- XLR & 1/4" mic inputs, RCA stereo line inputs, RCA stereo line out
- Emergency trigger all off except for Mic 1 + Mic ducking (auto attenuation of line ins when mic is in use)
- 70/100V allows numerous speakers to be connected without complicated impedance calculations
- Plug and play configuration
Monoprice 114886 Commercial Audio 120W 5ch 100/70V Mixer Amp with Microphone Priority (NO Logo)
- 60W per channel peak power. Channel Crosstalk: 80 dB
- 12 independent channels / up to 6 stereo zones
- frequency response: 5 Hz to 72 kHz
- signal to noise ratio: 95 dB
- Bridgeable zones, 80W per channel (8 0hm minimum), signal to noise ratio: 95 dB A-weighted
- A choice of direct channel input or dual universal bus Inputs selectable for each channel
Simplify the task of running distributed audio for restaurants, hotels, or anywhere large areas need background music and/or paging address systems. Connect hundreds of speakers covering acres of area without the need for large equipment racks.
OSD Audio MX1260 12 Channel, Six Stereo Zones, 60 Watt Peak per Channel, or Bridged Mono 80 Watts per Zone/Channel, Includes a choice of direct input or Dual Universal Bus Inputs selectable perper channel
Monoprice 102747 50-Feet 12AWG Enhanced Oxygen-Free Copper Loud Speaker Wire Cable
Get the most out of your home audio system with high quality oxygen-free copper speaker wire from Monoprice!. This wire features two conductors made of high purity (greater than 99. 95% pure) oxygen-free copper. One side of the clear outer PVC jacket is marked with a blue stripe to indicate polarity.