chitahome 
Nowadays, there are so many products of under cabinet lighting transformer 2a in the market and you are wondering to choose a best one.You have searched for under cabinet lighting transformer 2a in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings under cabinet lighting transformer 2a which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
LXG-LED LED Under Cabinet Lighting, 12V 2A Power DC3.5MM 1.35MM
Watt: 24W
Input Voltage: AC110-240V
Output Voltage: DC 12V 2A
2-year free replacement warranty
Litever Power Supply, LED Transformer, 12VDC 3 Amps,110VAC to 12V DC, Max Output 3A, 36W. Standard 110VAC US Input Plug, 5.5mm x2.1mm Output Connector, for LED Light Strip and More
Amazon.com
- Suitable for Litever LED Under Cabinet LED Lighting Kit LL-008 Series and various other 12VDC LED lights and other equipments.
- Premium high quality quiet LED power adapter. UL listed, Class 2 power supply.
- Safe power supply. Short circuit protection design with built-in input current fuse. Built-in over-temperature protection design.
- Input: 100~240VAC, 50/60Hz. Standard US plug with 120CM cable.
- Output: 12VDC, maxium 3A. Standard 5.5mm x 2.1mm DC plug with 150CM 22 awg cable.
AspenTek Us Led Power Supply Adapter with Inline on off Switch for Led Rigid Bar, Led Strip Light, Led Tape light, Under Cabinet Lighting, Output DC 12V/2A, 24 Watt Max
Amazon.com
- Plastic,copper
- Imported
- Voltage: DC 12V (Converts from 110 VAC wall outlet into a 12 Volt DC plug)
- Power: 24W ( Mainly designed for small LED strip light and other DC 12V LED lighting products that draw any amount of power up to 24 watts
- It is also suitable for DC CCTV Cameras,IR cameras,massage,etc )
- If the power of led light project is over 24 watts, the led light will blink since the power supply can not offer enough power for the light.In this case, please contact us via email, we will try our best to settle your issue soon
HitLights 24 Watt (2 Amp) LED Power Supply 110V AC to 12V DC Transformer UL-Listed Lighting Power Adapter for LED Strip Lights and Other Low Voltage Devices
Amazon.com
- 12 VOLTS DC OUTPUT SUITABLE FOR LED STRIP LIGHTS and other low voltage devices such as security cameras audio and video gear and more. Ideal for LED installations in living rooms shelving lighted cabinets toe-kicks and more
- PLUGS DIRECTLY INTO YOUR WALL OUTLET no hardwiring no soldering no electrician or electrical experience required. Includes output cable with a standard 5.5 x 2.1mm DC jack positive tip for connecting to your strip controller or dimmer
Product Description
Our UL-Listed 12V DC power supplies provide the power you need to light up your flexible LED light strips or other low-voltage devices by converting your 110-240V AC power to the 12 volt DC that LED strips run on. They’re available in various power ratings, from 15 Watts to 150 Watts and in various styles, from compact plug and play models to larger units capable of powering several rolls of strip. These premium adapter / transformers are UL-Listed and come with a HitLights 2 year warranty. 24 Watt Power Supply, UL-Listed Instructions :- Plug AC Cord into wall outlet- Connect DC output plug to DC input plug on your LED light strip, controller or dimmer Specifications :- Input Voltage : 110V-240V AC – (Direct wall plug – standard North American NEMA 1)- Output Wattage : 12V DC / 24 Watts (2 Amps / 2a ) – Four foot output cable with 5.5 x 2.1 mm DC jack- Dimensions : 86 x 48 x 33 mm (3-3/8 x 1-7/8 x 1-5/16 inches)- Certifications : UL Listed- Part Number : PWR-12V-024-30-U / TGC24-120200-05
Seller Warranty Description
2 Year Manufacturer Warranty
(UL Listed) Dimmable LED Driver 12V 24W IP67 Waterproof Power Supply, Constant Voltage Transformer Triac Dimming, Work with Wall Dimmer, 120V AC Line Dimming for LED Strip Light, Under Cabinet
Amazon.com
- AC LINE DIMMABLE- Converts 120VAC to 12VDC for LED strip light, connect the triac dimmer switch at AC line, dimming the light brightness from 1%-100%, work with standard wall dimmer.
- SAFE LED DRIVER- UL Cetified for US&CA market, high safety product, no fire hazard, work with 12V LED light only, such as: LED Strip light, cabinet light, Puck Lights, Rigid Strip Light etc.
- NEW TECHNOLOGY- Compatible with 99% dimmer brand on the market with forward phase dimmer, Triac Dimmer, check the recommend dimmer list for the dimmer brand and model.
HitLights 24 Watt Dimmable Driver, Electric LED Driver – 110V AC-12V DC Transformer. Compatible with Lutron, Leviton and More for LED Strip Lights, Constant Voltage LED Products
Amazon.com
- CONVERTS 110V AC to 12V DC and works with LED compatible dimmer switches from Lutron, Leviton and more
- SMOOTH AND RELIABLE DIMMING from 0 to 100% with no flicker
- SCREW TERMINAL CONNECTIONS for easy installation to electrical code. See diagram in images for wiring instructions.
- CHOOSE AN APPROPRIATE LIGHT LEVEL for any room, any mood, or any time of day
- HITLIGHTS QUALITY, ETL-LISTED & MADE IN THE USA and backed by a two year warranty from HitLights for peace of mind. Contact our US-based customer service team at any time for no-hassle troubleshooting and replacement or for any questions about purchasing or installation.
Our 12 volt Dimmable Drivers offer an elegant control and dimming solution for any of your LED light strip and flexible tape light projects. This 25 Watt Dimmable Driver replace hardwired adapters or power supplies and allow you to control the brightness of your LED light strips with a dimmer switch mounted in your wall – a more elegant and permanent solution than a dial dimmer or remote unit. Additionally, the wide range of compatible wall dimmers means that you get to choose the wall dimmer that best suits your home, office, or other building. These drivers are manufactured to our exacting technical specifications here in the United States, meaning that we are able to offer an unsurpassed five year warranty on these units. Our range of Dimmable Drivers are the ultimate solution in any of your LED lighting projects and are compatible with most Lutron and Leviton dimmer switches and most triac switches.
We suggest installing these in kitchen cabinets or under counters, in bars, closets, living rooms, behind media centers and televisions, or any other indoor locations. They provide a high quality architectural backlight with a low maintenance and low-voltage solution.
Features :
Control the brightness of your LED light strips with a wall dimmer
Compatible with all 12V LED light strips
ETL-Listed
2 Year Warranty
Instructions :
Driver input : Black (Live), White (Neutral)
Driver output : Red (Positive), Black (Negative)
Specifications :
Input : 120V AC
Output : 12V DC
Dimensions : 154x54x19mm (6-1/16x 2-1/16×13-16 inches)
Compatible Lutron dimmers include Ariadni, Vareo, Nova, Ceana, Diva, Gyder, Lyneo, Nova T and Skylark
Compatible Leviton dimmers include Mural, SureSlide, ToggleTouch and Vizia
For more information regarding dimmer compatibility and wiring, visit our website
Part Number – PWR-12V-024-30-D
Ustellar Dimmable LED Light Strip Kit, 300 Units SMD 2835 LEDs, 16.4ft/5m 12V LED Ribbon, 6000K Daylight White Under Cabinet Lighting Strips, Non-waterproof LED Tape, UL Listed Power Supply
Amazon.com
- SUPER BRIGHT AND SAFE TO USE: This 16.4ft strip light includes 300 bright LEDs. And the working voltage is 12V (A UL Listed Power Adaptor is included), extremely Low Heat. It is touchable.
- DIMMABLE: Controlled them by switch dimmer( included), convenient to adjust brightness.
- EASY INSTALLATION: Self-adhesive back with adhesive tape for safe and easy application.
- WIDELY USE:The strip has excellent heat dissipation, making it much more durable. It very suitable for living room, kitchen, under cabinet, dining room, bedroom, party, stairway, wedding, etc.
Keyola Full Set 10ft 60leds White Under Cabinet Lights Closet Kitchen Counter LED Light with Brightness Dimmer (White)
Amazon.com
- Easy installation: No wire needed, easier to install than wired lights, super-easy double-sided tape. clean the surface of the Cabinet, peel the double-sided tape, stick to the surface and plug the power adapter, and done!
- Dimmable LED Under Cabinet Lighting :With a handy dimmable touch switch, the lights can be easily turned on and off and dimmable.Touch sensor switch on the dimmer, turning LED lights on/off whenever you want. Press and hold button for several seconds, you can dim the lights.
Note：
Clean the surface of the closet or kitch before you want to stick !!!
please kindly make sure you will clean the surface of the Cabinet before put on the double-sided tape , or it will not stick well.
We use the best double-sided tape for this light , so normally there is no problem for most of the cabinet surface .
if the surface of the cabinet is not smooth or too dirty , I do suggest you use some Silicon Fastener Clip 15mm width to secure them .
Specification:
Length:10ft
Emitting Color: white (7000K~8000K)
Color temparature:7000K~8000K
Protection: IP65 Waterproof
Wattage:20w
Working Voltage: DC 12V
LED Quantity: 60pcs 5630leds,40 Lumen each led
Beaming angle: 160 °
Flexible to Use, good encircle and decrate any shape of Under Cabinet Lights:
20x3leds modes light in serial ,with 0.3FT extension wire each 3leds , good encircle and decrate any shape of Under Cabinet Lights , you also can cut and shorter them,to meet your different lighting needs.
Easy installation:
No wire needed, easier to install than wired lights, super-easy double-sided tape.
clean the surface of the Cabinet, peel the double-sided tape, stick to the surface and plug the power adapter, and done!
where can the cabinet lights be used?
The cabinet lights can be used as desk/bookshelf light , kitch cabinet light ,wardrobe light ,shoes cabinet light ,display counter light , showcase light , closet light , counter light , jewelry case light , Living room light , Bathroom mirror-front lighting ,Cosmetic Mirror/Vanity Mirror light ,etc.
Package included:
1 x10ft 60led lights
1 x 2A power adapter
1 x Touch sensor brightness Dimmer
Dimmable Driver 150W (2.5A), Magnetic, 110V AC-24V DC Transformer, Low Voltage Power Supply for LED Strip Lights- Compatible w/Lutron & Leviton – for Kitchens, Cabinets, Bedrooms & More – USA Made …
Amazon.com
- CONVERTS 110V AC to 24V DC and works with LED compatible dimmer switches from Lutron, Leviton and more.
- SMOOTH AND RELIABLE DIMMING from 0 to 100% with no flicker.
- BARE WIRE CONNECTIONS AND KNOCKOUTS for easy installation to electrical code. See diagram in images for wiring instructions.
- CHOOSE AN APPROPRIATE LIGHT LEVEL for any room, any mood, or any time of day.
- HITLIGHTS QUALITY, ETL-LISTED & MADE IN THE USA and backed by a FIVE year warranty from HitLights for peace of mind. Contact our US-based customer service team at any time for no-hassle troubleshooting and replacement or for any questions about purchasing or installation.
Our Dimmable Drivers offer an elegant control and dimming solution for any of your LED light strip projects. These 40 to 300 Watt Dimmable Drivers allow you to control the brightness of your LED light strips with a dimmer switch mounted in your wall – a more elegant and permanent solution than a dial dimmer or remote unit. Additionally, the wide range of compatible wall dimmers means that you get to choose the wall dimmer that best suits your home, office, or other building. These drivers are manufactured to our exacting technical specifications here in the United States, meaning that we are able to offer an unsurpassed five year warranty on these units. Our range of Dimmable Drivers are the ultimate solution in any of your LED lighting projects and are compatible with most Lutron and Leviton dimmer switches.
150 Watt Dimmable Driver
Product Features :
• Control the brightness of your LED light strips with a wall dimmer
• Compatible with all 24V LED light strips
• ETL-Listed
• Made in USA
• 5 Year Warranty
Installation instructions :
• Driver input : Green (Ground), Black (Live), White (Neutral)
• Driver output : Red (Positive), Blue (Negative)
Specifications :
• Input : 120V AC
• Output : 24V DC, 150 Watts (6.25 Amps)
• Dimensions : 76 x 249 x 76mm (2-15/16 x 9-7/8 x 2-15/16 inches)
• Compatible Lutron dimmers include Ariadni, Vareo, Nova, Ceana, Diva, Gyder, Lyneo, Nova T and Skylark
• Compatible Leviton dimmers include Mural, SureSlide, ToggleTouch and Vizia
• Part Number : PWR-24V-150-30-D
12V 2A LED Strip Power Supply 24W – iCreating 2018 New DC 12 Volt Universal Portable Power Supply Adapter for LED Strip Light, CCTV Camera with 5.5/2.1 Female Barrel Connector, 3528 2pin LED Connector
Amazon.com
- INPUT&OUTPUT: UL Listed, 100-240V AC input 50/60HZ, DC 12V 2A output, 24W max wattage
- PACKAGE INCLUDES: 1 x 12V 2A 24W power supply with 3.6ft power cord, 1 x 5.5/2.1 DC female barrel connector to screw adapter, 1 x 3528 8MM 2pin LED strip connector to DC adapter
- APPLICATION: For 3528 5050 2835 LED strip light, LED string, wireless routers, ADSL Cats, HUB, switch, security camera, Audio/Video power supply
HitLights LED Strip Lights, Cool White Lights Strip Kit 16.4 Ft 300 LEDs, 5000K, 72 Lumens per Foot – Includes Power Supply and Dimmer, 12V DC Tape Lights
Amazon.com
- EVERYTHING YOU NEED including a 16.4 feet / 5M of 300 LED SMD 3528 strip lights, a small 12V DC PWM dial dimmer, and an easy plugin 12 volt transformer.
- CUTTABLE AND CONNECTABLE - Compatible with our HitLights 8mm connector extensions and accessories. Simple connect - cut with a pair of scissors every two inches.
- DIMMABLE and FLEXIBLE these LED strips are great for a variety of indoor / interior uses including undercabinet lighting in kitchens ambient accent lighting in bedrooms lighting toe kicks in bathrooms or adding light to displays or shelves. Great for China cabinets or a home bar!
Product description Our SMD3528 LED light strip kits feature a peel and stick adhesive backing that can be mounted directly to most surfaces, adding a professional touch to any area in your home or business. Super high lumen and bright enough for task lighting, but controllable with the included compact plug in dimmer, they’re great for adding ambiance to ceiling coves or crown molding, under kitchen counters or above a cabinet, lighting a vanity, or any other room you need decorative lighting or full illumination. Available in 3000k warm white or 5000k cool white. Non-waterproof : • 1 x Roll 16. 4 Ft LED Light Strip• 1 x Dial Dimmer• 1 x Power Supply / Adapter Instructions : • Clean the surface you intend to stick the light strip• Peel the backing strip from the adhesive tape • Press and hold the light strip firmly against the surface• Plug your light strip into the included 12V DC power supply, and into your electric outlet Specifications : • Input : 12V DC / 1. 3 Watts per Foot• Output : 72 Lumens per Foot – High CRI• Strip Width : 8 mm• LED’s : 300 Per Spool• 1 Year Our thin, low voltage light strips are also cut table and connectable with extension cables and connectors – Search for B0062RBR84, or make your strip portable with a Hit Lights battery – (B007RQW5WG). Also check out our LED string, tape, rope, and ribbon lights, LED dimmers, and LED remote controller options and foam mounting tape options. Seller Description1 Year Manufacturer
Armacost Lighting 840240 LED Power Supply Dimmable Driver, 24 Watt
Amazon.com
- Provides smooth, full range flicker-free dimming for 12-volt LED Lighting such as LED strips, modules, light bars, puck and other LED accent lights
- Compatible with all dimmers and higher end Lighting control systems, also compatible with 12-volt, low-voltage LED dimmers and Color controllers
- No minimum Lighting load required for wide range dimming, no de-rating is required
- load up to 100% of the model’s 24 watt rated capacity
