chitahome 
Nowadays, there are so many products of whole home audio distribution in the market and you are wondering to choose a best one.You have searched for whole home audio distribution in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings whole home audio distribution which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
SPW8 Whole House Audio 8-Zone Speaker Distribution Panel Single Audio Input 300W Per Channel – OSD Audio
Amazon.com
- 100 WATT MAX: The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup.
- CONTROL 6 SPEAKERS: The new indoor multichannel speaker switcher controls up to 6 speaker pairs connected to a stereo at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire.
The SPW-8 is a stereo (two channel), one input, eight output, broad frequency response, volume control distribution hub. It provides a simple solution in complex speaker installations providing an easy way to connect from two to eight volume controls and pairs of stereo speakers to a single stereo receiver/amplifier. All outputs are labeled easing both connection and troubleshooting of a system
Specifications
- Power handling: 150 watts RMS per channel (suitable for use with 300 watt per channel rated receivers/amplifiers)
- Frequency Response: 20 Hz – 22kHz (+0dB, -0dB)
- Wire size acceptance: 2 or 4 conductor, stranded, 16 AWG to 14 AWG
- Dimensions: L 3.40 in. x W 1.70 in. x H 7.00 in
- Maximum Number of Volume Control/Speaker
- Connections: 8 pairs
- Must be used with impedance matching volume controls
6 Channel Speaker Selector Switch – Multi Zone A B Speaker Distribution Controller Box w/ Independent Audio Source Volume Control, Supports Home Theater Stereo Receiver System – Pyle PSLSW6
Amazon.com
- 60W per channel peak power. Channel Crosstalk: 80 dB
- 12 independent channels / up to 6 stereo zones
- frequency response: 5 Hz to 72 kHz
- signal to noise ratio: 95 dB
- Bridgeable zones, 80W per channel (8 0hm minimum), signal to noise ratio: 95 dB A-weighted
- A choice of direct channel input or dual universal bus Inputs selectable for each channel
Pyle Model : PSLSW6
6-Ch. Speaker Selector System
Multi-Zone Speaker Selector, 6-Channel Audio Speaker Receiver System
Features:
Technical Specs:
OSD Audio MX1260 12 Channel, Six Stereo Zones, 60 Watt Peak per Channel, or Bridged Mono 80 Watts per Zone/Channel, Includes a choice of direct input or Dual Universal Bus Inputs selectable perper channel
Amazon.com
- iOS & Android App!! Includes 8 HDbaseT PoC Receivers (230ft Distance Range) that don't need any additional power
- 8 HDMI source devices (BluRay, Apple TV) switched to 16 HDbaseT & HDMI output destinations (TVs, Projectors)
- CEC, HDCP2.2, Full EDID Control, Analog & Optical Audio Outputs that switch simultaneously with the HDMI outputs
- RS232, IP, and IR Remote Control! Guaranteed compatibility with Crestron, Savant, Control, or any other RS232 system. We have a Crestron module available for free!
8×16 HDbaseT 4K Matrix SWITCHER 8×8 16×16 with 8 Receivers (CAT5e or CAT6) HDMI HDCP2.2 HDTV Routing SELECTOR SPDIF Audio CONTROL4 Savant Home Automation 4K2K
Amazon.com
- Up to 6 Separate Speaker Pairs to your Stereo System
- Accepts Speaker Wires Up to 14- Gauge
- Handles 100Watts Per Channel with Speaker Systems that have a Minimum Impedance of 8 Ohms
- Up to 6 Separate Speaker Pairs to your Stereo System - Support Two Stereo Amplifiers
- Accepts Speaker Wires Up to 14- Gauge - Frequency Response: 20Hz-20KHz
- Handles 100Watts Per Channel with Speaker Systems that have a Minimum Impedance of 8 Ohms - Dimensions: 16.92- Inches(W) x 3.03- Inches(H) x 6.29- Inches(D)
This is a BRAND NEW 4K 8×16 HDbaseT & Hdmi Matrix Switcher with simultaneous optical audio, analog audio outputs, infrared ports, and RS232 serial ports! This switcher allows you to route 8 input sources (Bluray, Cable Boxes, Directv, etc) to 16 output sources (Televisions, Projectors, etc). Please note that the 16 output sources are 8 HDbaseT outputs and 8 mirrored HDMI outputs to a total of 16 displays. Each pair of HDbaseT and HDMI outputs mirror each other. You can control this matrix with iOS or Android App!!! It supports full 4K2K@60Hz resolution and HDCP2.2! It also supports 4K HDR at 30hz! DON’T BOTHER BUYING ANY SWITCHER THAT DOESN’T SUPPORT HDCP 2.2. ALL FUTURE MEDIA REQUIRES HDCP 2.2…OTHERWISE, YOU’LL HAVE A BLANK SCREEN ON YOUR TVS. The package includes 8 HDbaseT PoC Receivers with a 230ft distance range! It comes with remote control, power cable, rack ears, RS232 serial cable, and IR extenders. The simultaneous audio outputs are incredibly important! Lets say you have 8 Apple TVs going to 16 different Televisions. Additionally, you have multi-channel amplifiers powering ceiling speakers for each of the televisions. Apple TVs don’t have optical outputs anymore…only HDMI outputs. So with this matrix, you would simply plug the Apple TV HDMI outputs into the 8 HDMI inputs. And then connect the simultaneous audio outputs to your multi-channel amplifier…quick and easy! This setup would be much more difficult with other HDMI matrix units with no optical audio outputs. You would need to buy a bunch of HDMI to optical audio adapters, as well as many more cables….it would be a mess! This Matrix is guaranteed to perform just as well, or better, than any other matrix in the market. Even those that sell for $10,000 or more! Don’t be fooled by the AV industry! There is no need to overpay for the latest technologies This type of switch is perfect for media in sports bars, casinos, hotels, custom homes, apartments and night clubs.
Premium New and Improved 4 Zone Channel Speaker Switch Selector Volume Control Switch Box Hub Distribution Box for Multi Channel High Powered Amplifier Control 4 Pairs of Speakers – Pyle PSPVC6
Amazon.com
- HIGH POWER: The SVC300 is rated at 300 Watts per channel with minimal bass roll-off. It includes front mounted adjustable impedance jumpers to add up to eight pairs of 8 ohm speakers simultaneously.
- VOLUME CONTROL: The controls allow you to adjust the volume of a pair of speakers independently of other speakers in a house audio system. They are ideal for both softer and higher volume locations.
- IMPEDANCE PROTECTION: This feature of SVC300 assists in stabilizing the ohm load going back to the amp or receiver with parallel connections to avoid overheating and damaging expensive equipment.
OSD Audio 300W in-Wall Home Theater Speaker Volume Control – Knob Style – SVC300
Amazon.com
- 2x15 WATT PEAK POWER: The Pyle Dual Channel Mini Audio Amplifier is perfect for your home theater acoustic sound system. Gives you 2x15 watts peak power which can be used for multi speakers at 4 ohms impedance, enjoy high quality music and movies
- MASTER VOLUME CONTROL: The improved compact bookshelf speaker sound amplifier features crisp and responsive buttons for the power switch. It also features rotary knob control for the master volume adjustment. Runs on 110 or 220 V
Pyle PCA1.5 2×15 Watt Stereo Power Amplifier – Compact Mini 2-Channel Portable Home Audio Speaker Receiver Box for Amplified Speakers Sound System with RCA Cable L/R Input for CD Player, Tuner, MP3
Russound CA4KT1 Multiroom Controller Amplifier
Amazon.com
- 240 WATT POWER: The Pyle 5 Channel Power Amplifier Mixer is perfect for your PA and home theater entertainment system. It gives you 240W peak power to be used for multi speakers w/ 4-8 ohms impedance allowing you to enjoy amplified audio
- 7 INPUTS: The personal digital amp box supports USB, SD/MMC w/ 3.5mm AUX jack for iPod, MP3, computer, PC, iPhone, smart phone, tape deck, tuner, CD player. It also features 2 ¼” microphone inputs for karaoke or talkover, built-in FM radio
The CA4 system is an affordable four-zone, four-source multiroom system. Share your music anywhere in your home, at the touch of a button.
Enjoy your favorite albums in the kitchen and living room while satellite radio plays in the den.
The CA4 multiroom system makes enjoying your music throughout your home an affordable luxury.
The CA4-KP keypad selects between four available sources and adjusts bass, treble and loudness.
The keypad also sets source grouping, all on, all off, and party mode.
Featuring green backlighting, an IR receiver and IR confirmation through an LED status indicator, the keypad includes white and almond trim plates and fits in any Decora plate.
Two CA4 controllers can be connected, easily expanding to eight zones for larger homes or budgets.
the CA4-RC remote controler, includes extensive IR device codes and learning capabilities, making control of the system as simple as pressing a button.
With advanced features and easy to use controls, the new CA4 combines exceptional value and straightforward operation for a truly affordable multiroom audio experience.
Home Audio Power Amplifier Mixer – 240W 5 Channel Sound Stereo Entertainment Receiver Box w/ FM Radio Antenna, USB, RCA, AUX, LED, 2 MIC IN – For Speaker, Studio Theater, PA System Use – Pyle PT510
Amazon.com
- Acoustic Audio AAVCDW impedance matching white dial speaker volume control, recommended power of 150 watts per channel
- Inputs and outputs accept up to 14 gauge wire, can be used with 4ohm, 8ohm, and 16ohm speakers, independent grounds for use with any amplifier
- White faceplate included, mounting depth is 3.25", fits most deep single gang electrical junction boxes
- Use for in wall or in ceiling home entertainment, home theater, multiple room system, industrial sound system
Product Description
PyleHome Model : PT510
Public Address Power Amplifier
240 Watt Public Address Power Amplifier with 70V Output & Mic Talkover, USB/SD Card MP3 Player, Built-in FM Radio & LED Display
This home amplifier is perfect for powering any stereo system. Complete with USB/SD memory readers, CD, Microphone, AUX inputs, FM tuner, media mode selector function — this simple to use and durable amp has also comes with AUX input RCA jack, AUX input ¼’ / 6.35mm input connectors, high, mid, low control & much more . Using sophisticated circuitry and premium components for uncompromising musicality — this product is famous for delivering powerful and accurate sound. Use the 3.5mm AUX input jack to connect additional audio devices including iPods/MP3 players. This small but powerful amp delivers clear and crisp audio for all of your audio needs – also comes with removable AC power cord and un-switched AC power outlet for connecting additional audio equipment. Durable and affordable, this amp is made to last.
From the Manufacturer
view larger
view larger
view larger
view larger
view larger
view larger
Power Amplifier
The Pyle PT510 240 Watt Power amplifier provides ultimate power and features a 70V output, and USB MP3 Media playback and built-in FM radio. The PT510 works great for public announcements, school auditoriums, office paging systems, and more.
240 Watts/70 Volts of Power
The PT510 amplifier has a 70 volt transformer that can power as many speakers as you desire. You need to make sure that the total power requirement of all the added speakers does not exceed the power output capability of the distribution amplifier.
Smartphone and iPod MP3 Playback
Connect your Smartphone, iPod or other external devices and let it charge through the USB and at the same time play music through the auxiliary input.
USB, SD/MMC Card MP3 Playback
Quickly transfer music from your computers Media library to USB flash drive or SD memory card. Then plug in your USB Thumb drive or SD/MMC memory card and play your favorite music.
Microphone Talkover
Simply talk into MIC1’s input and the music volume will automatically lower when spoken into so the announcement can be heard loud and clear. This public address function is great for schools, offices, paging systems, public announcements and just about any large social event.
Built-in FM Radio
The PT510 comes with a built-in FM radio with auto scan function. Play your favorite FM radio stations for your music enjoyment with help from the LED display. Retractable antenna mounted on the back for better signal reception. Use Auto scan function to find your favorite radio stations.
Dual Microphones
The PT510 comes with two microphone inputs. MIC1 features a “Talk over Feature”. You can use it to broadcast your message or sing over the streaming audio or background music. Both microphone inputs have independent volume controls.
Customize your sound
You will be able to control the way your music sounds by adjusting the equalizer settings including lows, mids, highs, master volume and independent input volume controls. All of these controls are conveniently located on the front of the unit.
Worldwide Use
This amplifier has selectable input voltage from 110 V/60 Hz (the standard in USA and Canada) to 220 V/50 Hz (for European operation). Please make sure the switch is in the proper position before operating.
Included accessories:
Removable AC Power Cord
Features
- Built-in USB/SD Card Readers
- FM Tuner with EQ/Volume Control
- Media Mode Selector Function
- 4Ohm/8Ohm – 70 Volt/100 Volt Speaker Outputs Terminals
- Tuner Down/Up/Scan Button Functions
- Power On/Off with Red LED Indicator
- Master Volume Rotary Control
- High/Mid/Low Tone Level Controls
- Front 3.5mm AUX Input Jack for iPod/MP3 Players
- MIC 1 Talk-Over Feature
- Phono/AUX Volume Input Control
- Mic 1/Mic 2 Volume Controls
- Mic 1 /Mic 2/AUX-IN 6.35mm/ ¼” Input Connectors
- AUX-IN RCA Input Jack
- Voltage Selector 110/220V
- Removable AC Power Cord
- Un-Switched AC Power Outlet for Optional Equipment
- Built in Retractable Antenna for FM Tuner
- Dimensions: 12.6” H x 7.48” W x 3.15” D
More Power Amplifier Options: |
|||||
|---|---|---|---|---|---|
 |
 |
 |
 |
 |
|
| Total Watt Power | 2 x 15 Watt | 2 x 40 Watt | 2 x 75 Watt | 2 x 120 Watt | 240 Watt |
| MP3 Media Player Function | X | X | X | X | X |
| SD/MMC Card Slots | X | X | X | X | X |
| AUX/CD Input | X | X | X | X | 3.5mm and 1/4″ |
| MIC Input Jack | Dual – 2 Inputs | ||||
| USB Slot | X | X | X | X | X |
| Included Remote Control | X | X | X | X | X |
| Worldwide Use (Voltage Selector) | X | X | X | X | X |
| 70 Volt Speaker Output | X | ||||
Acoustic Audio AAVCDW Home White Dial Speaker Volume Control Wall Mount
Specifications
Acoustic Audio AAVCDW Impedance Matching Dial White Volume Control
Use up to 8 pairs
150 Watts RMS per channel
Use up to 14 Gauge Wire
Use with 4ohm, 8ohm, and 16ohm speakers
Impedance Matching
Use any amp with the independent grounds
Included are White Dial and Faceplate
3.25″ mounting depth
Use deep single gang junction box
Full instructions included
Applications:
In Wall or In Ceiling Home Entertainment
Home Theater System
Multiple Room System
Industrial Sound System
This Listing and Price is for 1 AAVCDW Volume Control and Full Instructions
Distributed Home Audio Whole House Sound System- Ceiling Speakers and Wall Volume Controls for 6+ Rooms
Whole-House Audio Package with 100 watt/ch AM/FM Receiver with Bluetooth, 6 pair of Ceiling Speakers, and 6 wall volume controls. Enjoy music throughout your house with this AM/FM receiver/6pr. ceiling speaker/volume control package. Everything you need to start your system, with room to grow! High quality components throughout for impressive sound quality and simple operation. Add up one additional rooms! Sherwood receiver features AM/FM stereo tuning with 30 station presets, 100 watt per channel stereo amplifier, two additional line level inputs (for CD, MP3, satellite radio, etc.), phono input, and IR remote control. The 6.5″ 2-way ceiling speaker is one of the most commonly used speaker types in custom installed audio systems. Two-way design includes a 6.5″ long-throw poly cone woofer and 1″ dome tweeter, for clean high frequency response up to 20KHz. White plastic frame and painted steel grill compliments any decor and can be painted to match your wall color. Attached mounting brackets easily mount to wall board without the need for additional hardware. Wall volume controls provide independent level adjustment and on/off for each pair of speakers.
Home Audio Whole House Speaker System- 12 Ceiling Speakers 6PR- Flush 5.25" Round Speakers & Switcher
Enjoy music throughout your house with this 6pr. ceiling speaker/speaker switcher package. Everything you need to start your system, with room to grow! High quality components throughout for impressive sound quality and simple operation. You supply the amplifier and wiring. We recommend using a basic AM/FM stereo receiver with 80-120 watts per channel. The 5.25″ 2-way ceiling speaker is one of the most commonly used speaker types in custom installed audio systems. Two-way design includes a 5.25″ long-throw poly cone woofer with rubber surround and 1/2″ polymer dome tweeter, for clean high frequency response up to 20KHz. White plastic frame and painted steel grill compliments any decor and can be painted to match your wall color. Attached mounting brackets easily mount to wall board without the need for additional hardware. Stereo speaker switcher provides on/off switching for four pair of speakers, with impedance protection to keep your amplifier happy.
